Reference Guide (PDF Edition)

Role Description
w
[Choose non-CPU
lens number]
Press the control and rotate a command dial to choose a lens
number saved using the [Non-CPU lens data] item in the setup
menu.
X
[
Focus (M/A)]
Autofocus can be over-ridden by rotating the lens control ring
(autofocus with manual override). The control ring can be used
for manual focus while the shutter-release button is pressed
halfway. To refocus using autofocus, lift your finger from the
shutter-release button and then press it halfway again.
q
[Aperture] Rotate the lens control ring to adjust aperture.
t
[Aperture (open)]
Rotate the lens Fn ring counterclockwise to widen the lens
aperture. This option is enabled automatically when [Aperture
(close)] is selected for [Lens Fn ring (clockwise)].
q
[Aperture (close)]
Rotate the lens Fn ring clockwise to narrow the lens aperture.
This option is enabled automatically when [Aperture (open)] is
selected for [Lens Fn ring (counterclockwise)].
E
[Exposure
compensation]
Assigning this function to the Fn button for vertical shooting
allows exposure compensation to be adjusted by holding the
button and rotating a command dial.
Assigning this function to the lens control ring allows
exposure compensation to be adjusted by rotating the ring.
i
[Exposure
compensation +]
Rotate the lens Fn ring clockwise for increased exposure
compensation. This option is enabled automatically when
[Exposure compensation−] is selected for [Lens Fn ring
(counterclockwise)].
h
[Exposure
compensation −]
Rotate the lens Fn ring counterclockwise to reduce exposure
compensation. This option is enabled automatically when
[Exposure compensation+] is selected for [Lens Fn ring
(clockwise)].
9
[ISO sensitivity] Rotate the lens control ring to adjust ISO sensitivity.
B
[ISO sensitivity
(increase)]
Rotate the lens Fn ring clockwise to increase ISO sensitivity.
This option is enabled automatically when [ISO sensitivity
(decrease)] is selected for [Lens Fn ring (counterclockwise)].
644
f2: Custom Controls (Shooting)