Setting Guide (Video Edition)

58
Settings
58
Controls and Displays, Continued
■ Synchronizing Time Codes across Devices
Use the [ATOMOS AirGlu BT options] item in the network menu to wirelessly connect the camera to
Atomos UltraSync BLUE AirGlu accessories via Bluetooth.
 The UltraSync BLUE can be used for simultaneous wireless connections to multiple compatible
cameras or audio recorders. Time codes are transmitted to the connected devices from the Ultra-
Sync BLUE, synchronizing time codes even across devices from a mix of manufacturers. For infor-
mation on the maximum number of simultaneous connections, see the Atomos website.
[Connect to ATOMOS AirGlu BT] Establish a wireless Bluetooth connection to a previously-paired UltraSync BLUE.
[Save ATOMOS AirGlu BT pairing info]
Pair the camera with the UltraSync BLUE.
• The camera name will be displayed in the camera monitor.
• Use the controls on the UltraSync BLUE to pair it with the camera. For more infor-
mation, see the documentation for the UltraSync BLUE.
[Delete ATOMOS AirGlu BT pairing info] End the wireless connection between the camera and the UltraSync BLUE.
[Camera] Choose the name under which the camera is listed on the UltraSync BLUE.
 After establishing a wireless connection to the UltraSync BLUE, select [On] or [On (with HDMI
output)] for [Timecode] > [Record timecodes] in the video recording menu to start receiving time
codes. The time codes will appear in the camera shooting display.
 If no time code is received, the shooting display will show “--:--:--:--” (or “00:00:00:00” when an ex-
ternal device is connected via HDMI). No time codes will be recorded if lming is begun at this
stage.