Setting Guide (Video Edition)
Table Of Contents
- Table of Contents
- Getting Ready
- Settings
- Accessing Video Settings
- Storage
- Picture Quality
- Exposure
- Focus
- Audio
- Auto Capture
- Controls and Displays
- Timecode
- Hi-Res Zoom
- Power Zoom
- Reverse Ring for Focus
- Focus Ring Rotation Range
- Control Ring Response
- Customize i Menu
- Custom Controls
- Control Lock
- Fine ISO Control (Mode M)
- View Assist
- Zebra Pattern
- Grid Type
- Brightness Information Display
- Custom Shooting Displays
- Red REC frame indicator
- Viewfinder Display Size
- Auto Temperature Cutout
- Monitor Mode
- HDMI Output
- Viewing Videos
- Appendix
40
Settings
40
Exposure, Continued
Active D-LightingActive D-Lighting
Preserve details in highlights and shadows, creating pictures with nat-
ural contrast. Use for high-contrast scenes, for example when photo-
graphing brightly-lit outdoor scenery through a door or window or tak-
ing pictures of shaded subjects on a sunny day.
Settings can be adjusted using [Active D-Lighting] in the video record-
ing menu.
The option currently selected is shown in the display during shooting.
Active D-Lighting
Active D-Lighting will be xed at [O] during RAW recording or when [HLG] or [N-Log] is selected for
video tone mode.
Video Flicker ReductionVideo Flicker Reduction
Reduce icker and banding in the shooting display and in recorded foot-
age when lming video under uorescent or mercury-vapor lighting.
Settings can be adjusted using [Video icker reduction] in the video
recording menu.
Choose [Auto] to allow the camera to automatically choose the cor-
rect frequency.
If [Auto] fails to produce the desired results, select [50Hz] or [60Hz]
according to the frequency of the local power supply. Choose [50Hz]
for areas with a 50Hz power supply, [60Hz] for areas with a 60 Hz
power supply.
Changes to [Video icker reduction] also apply to the shooting dis-
play in photo mode.
Cautions: “Video Flicker Reduction”
• If [Auto] fails to produce the desired results and you are unsure as to the frequency of the local power
supply, test both the 50 and 60Hz options and choose the one that produces the best results.
• Flicker reduction may not produce the desired results if the subject is very bright. If this is the case, try
choosing a smaller aperture (higher f-number).
• Tailoring shutter speed to minimize icker may not produce the desired results in modes other than
M, as the actual speed may not precisely match the value selected. If this is the case, select mode M
and choose a shutter speed adapted to the frequency of the local power supply:
−50 Hz: ¹⁄₁₀₀s, ¹⁄₅₀s, ¹⁄₂₅s
−60 Hz: ¹⁄₁₂₅s, ¹⁄₆₀s, ¹⁄₃₀s
ii-button menu-button menu
4
Camera controlsCamera controls
4
Other menusOther menus
4
ii-button menu-button menu
—
Camera controlsCamera controls —
Other menusOther menus
4