Setting Guide (Video Edition)
Table Of Contents
- Table of Contents
- Getting Ready
- Settings
- Accessing Video Settings
- Storage
- Picture Quality
- Exposure
- Focus
- Audio
- Auto Capture
- Controls and Displays
- Timecode
- Hi-Res Zoom
- Power Zoom
- Reverse Ring for Focus
- Focus Ring Rotation Range
- Control Ring Response
- Customize i Menu
- Custom Controls
- Control Lock
- Fine ISO Control (Mode M)
- View Assist
- Zebra Pattern
- Grid Type
- Brightness Information Display
- Custom Shooting Displays
- Red REC frame indicator
- Viewfinder Display Size
- Auto Temperature Cutout
- Monitor Mode
- HDMI Output
- Viewing Videos
- Appendix
37
Settings
Picture Quality, Continued
37
Electronic VRElectronic VR
Choose whether to enable electronic vibration reduction in video mode.
1
With the camera in video mode, press the i button and then high-
light [Electronic VR] and press J.
Options will be displayed.
You can also select an option using the command dials before
pressing the J button.
2
Press 4 or 2 to highlight the desired option and press J to select.
To exit to the shooting display, press the i button again.
Electronic Vibration Reduction
• Electronic vibration reduction is xed at [OFF] at a frame size of 7680× 4320 and at frame rates of
120p or 100p.
• Selecting [ON] reduces the size of the crop, slightly increasing the apparent zoom ratio.
• Selecting [ON] may result in a slight delay before the image in the display follows the movement of
the camera when the camera is panned horizontally or vertically.
• Electronic vibration reduction is not available during RAW recording.
ii-button menu-button menu
4
Camera controlsCamera controls —
Other menusOther menus
4