Reference Guide (PDF Edition)

675
A
Custom Settings: Fine-Tuning Camera Settings
a
[Control lock]
•
Press the control and rotate the main command
dial to lock shutter speed (modes S and M). To
lock aperture (modes A and M), press the
control and rotate the sub-command dial.
•
To lock focus-point selection, hold the control
and press
1
,
3
,
4
, or
2
.
v
[1 step spd/
aperture]
Make adjustments to shutter speed and aperture
in increments of 1 EV, regardless of the option
selected for Custom Setting b2 [EV steps for
exposure cntrl].
•
In modes S and M, shutter speed can be
adjusted in increments of 1 EV by holding the
control and rotating the main command dial.
•
In modes A and M, aperture can be adjusted in
increments of 1 EV by holding the control and
rotating the sub-command dial.
w
[Choose non-
CPU lens
number]
Press the control and rotate a command dial to
choose a lens number saved using the [Non-CPU
lens data] item in the setup menu.
X
[Focus (M/A)]
Autofocus can be over-ridden by rotating the lens
control ring (autofocus with manual override). The
control ring can be used for manual focus while
the shutter-release button is pressed halfway. To
refocus using autofocus, lift your finger from the
shutter-release button and then press it halfway
again.
Role Description