Reference Guide (PDF Edition)

433
Synchronized Release
A
Suspending Synchronized Release
To temporarily disable synchronized release without ending the camera’s
connection to the network, select [OFF] for [Connect to other cameras]>
[Synchronized release] in the network menu.
A
Viewing Remote Camera Status
To view remote camera status, highlight
[Remote camera list] on the master camera and
press
2
.
•
Remote cameras are identified by IP address.
•
Remote camera status is displayed as follows:
-[Connected]: Normal connection.
-[Busy]: The camera is being controlled from
another master camera.
-[Error]: A remote camera has yet to be assigned to the slot or the group
name is not correct. A further possibility is that the remote camera is off
or its standby timer has expired.
-[OFF]: [OFF] is selected for [Synchronized release] on the remote
camera.
•
Highlighting a remote camera with the [Connected] label and pressing
2
displays the number of pictures awaiting upload from the camera via FTP,
FTP connection status, the battery level, and the number of exposures
remaining.
•
The entries for the remote cameras previously used for synchronized
release will show the time of the most recent shot.