Reference Guide (PDF Edition)

377
Computers: Connecting via Ethernet or Wireless LAN
❚❚
The [Connect to Computer] Camera Control
Display
The [Connect to computer] display shows the following:
D
Loss of Signal
Loss of signal while the camera is connected to a wireless network may
disrupt the connection to the computer. If the camera network indicator
flashes amber, select [End current connection] for [Connect to
computer]> [Network settings] in the network menu before connecting to
the network again. When the signal is re-established, the camera will
reconnect to the computer and resume upload of any pictures that have yet
to be transferred. Note that upload cannot be resumed if you turn the
camera off before transfer is complete.
1
3 2
1
Status: The status of the
connection to the host. The
profile name is displayed in
green when a connection is
established. Errors are also
displayed here (
0
411).
2
Signal strength: Ethernet
connections are shown by
d
.
When the camera is connected
to a wireless network, the icon
instead shows the wireless
signal strength.
3
Band: The band used by the
wireless network to which the
camera is connected in
infrastructure mode.