Reference Guide (PDF Edition)

164
White Balance
Fine-Tuning White Balance
Each white balance option can be fine-tuned by up to six steps in either
direction from the center along both the A (amber)–B (blue) and
G (green)–M (magenta) axes.
❚❚
Using Buttons
1
Choose a white balance option by holding the
U
button and
rotating a command dial.
2
Keeping the
U
button pressed, fine-tune white balance using
the multi selector.
•
Use the multi selector to position the
cursor on the grid. The selected value is
displayed to the right of the grid.
•
The A (amber)–B (blue) axis
corresponds to color temperature and
is ruled in increments of 0.5. A change
of 1 is equivalent to approximately
5mired.
•
The G (green)–M (magenta) axis has effects similar to color
compensation filters and is ruled in increments of 0.25. A change
of 1 is equivalent to approximately 0.05 diffuse density units.