Reference Guide (PDF Edition)

150
Release Mode
High-Speed Frame Capture (C30/C120)
For high-speed burst
photography at frame rates of 30
or 120 fps, set the release mode
dial to
c
and then hold the
c
button and rotate the main
command dial to choose [C30] or
[C120].
•
The maximum length for bursts taken in these modes is
approximately four seconds.
•
The photos recorded may also include the final pictures from frames
buffered while the shutter-release button is pressed halfway (“Pre-
Release Capture”); to choose how much of the buffer is saved, use
Custom Setting d4 [C30/C120 options]. You can also limit the length
of the burst recorded after the shutter-release button is pressed all the
way down (
0
635).