Manual cu modificările aduse de actualizarea firmware
Table Of Contents
- Table of Contents
- Changes with “C” Firmware Version 5.00
- Features Available with “C” Firmware Version 5.00
- Changes Made with “C” Firmware Version 5.00
- New Picture Control Item: “Rich Tone Portrait”
- New High-Speed Frame Capture + Option: C15
- New Image Quality Item Added for High-Speed Frame Capture + Shooting
- New Photo Shooting Menu Item to Select Noise Reduction Mode: “High ISO NR Mode”
- “Skin Softening” Added to Photo Shooting and Video Recording Menus
- “Portrait Impression Balance” Added to Photo Shooting and Video Recording Menus
- Frequency Setting Mode Added to High-Frequency Flicker Reduction Function
- Changes and Additions to Auto Capture Functions
- Compatibility with the Camera’s Manual Focus Setting
- DX Image Area Support
- New Release Mode Options : “C15” and “C60”
- Changes to Settings Displays and Setting Names
- Range Extended for “Advanced: Distance”
- Airplanes Added to Subject Detection Types
- “Set Start Day/Time” Added
- Yellow Frame During Auto Capture
- Profoto A10 Now Usable as AF-Assist Illuminator
- Changes to Hi-Res Zoom
- New Video Playback i Menu Item: “Playback Speed”
- “Customize Retouch Options” Added to “Retouch” Playback i Menu
- New Item for “Series Playback” in Playback Menu: ”Auto Series Playback Options”
- New Playback Menu Item: “Auto Image Rotation”
- Separate Shooting Modes Now Configurable for Photo and Video Modes
- “Focus Point Border Width” Added to Custom Setting a11 “Focus Point Display”
- New Custom Setting: a14 “Max. Aperture Lv During MF”
- New Custom Settings: d19/g17 “Half-Press to Cancel Zoom (MF)”
- New Options for Custom Settings f1/g1 “Customize i Menu”
- Exposure Compensation and White Balance Now Changeable During Shooting Function Recall
- New Roles for Custom Settings f2 “Custom Controls (Shooting)” and g2 “Custom Controls”
- New Roles for Custom Setting f3 “Custom Controls (Playback)”
- Changes in Full Formatting Procedures for “Format Memory Card” in the Setup Menu
- Shooting Display Maximum Zoom Now 400%
- Memory Card High-Temperature Warning Position Changed
- New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”
- FTP Port Number Now Specifiable in FTP Connection Settings
- New Option for “Connect to FTP Server” in Network Menu: “Upload in HEIF Format”
- Using AirGlu Accessories While MC-N10 Remote Grips Connected
- Menu Items and Defaults for “C” Firmware Version 5.00
- Post-Upgrade Specifications for “C” Firmware Version 5.00
- Index
[Time-lapse video]
[Interv
al]: 5 s
[Shooting time]: 25 min.
[Exposure smoothing]: ON
[Choose image area]: FX
[Video file type]: H.265 8-bit (MOV)
[Frame size/frame rate]: 3840×2160; 30p
[Interval priority]: OFF
[Focus before each shot]: OFF
[Destination]: Slot 1
[Focus shift shooting]
[No. of shots]: 100
[Focus step width]: 5
[Interval until next shot]: 0
[First-frame exposure lock]: ON
[Focus position auto reset]: OFF
[Starting storage folder]
[New folder]: U
[Reset file numbering]: U
[Auto capture]
[Select user preset]: P-1
Video Recording Menu
[Shooting menu bank]: A
[Ext
ended menu banks]: OFF
[Storage folder]
[Rename]: NCZ_9
[Select folder by number]: 100
[Select folder from list]: –
[File naming]: DSC
[Destination]: Slot 1
[Video file type]: H.265 8-bit (MOV)
[Frame size/frame rate]: 3840×2160; 30p
[Video quality (N-RAW)]: High quality
[Image area]
[Choose image area]: FX
[DX crop alert]: OFF
[Extended oversampling]: OFF
[ISO sensitivity settings]
[Maximum sensitivity]: 25600
[Auto ISO control (mode M)]: ON
58
Menu Items and Defaults for “C” Firmware Version
5.00
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-