Manual cu modificările aduse de actualizarea firmware
Table Of Contents
- Table of Contents
- Changes with “C” Firmware Version 5.00
- Features Available with “C” Firmware Version 5.00
- Changes Made with “C” Firmware Version 5.00
- New Picture Control Item: “Rich Tone Portrait”
- New High-Speed Frame Capture + Option: C15
- New Image Quality Item Added for High-Speed Frame Capture + Shooting
- New Photo Shooting Menu Item to Select Noise Reduction Mode: “High ISO NR Mode”
- “Skin Softening” Added to Photo Shooting and Video Recording Menus
- “Portrait Impression Balance” Added to Photo Shooting and Video Recording Menus
- Frequency Setting Mode Added to High-Frequency Flicker Reduction Function
- Changes and Additions to Auto Capture Functions
- Compatibility with the Camera’s Manual Focus Setting
- DX Image Area Support
- New Release Mode Options : “C15” and “C60”
- Changes to Settings Displays and Setting Names
- Range Extended for “Advanced: Distance”
- Airplanes Added to Subject Detection Types
- “Set Start Day/Time” Added
- Yellow Frame During Auto Capture
- Profoto A10 Now Usable as AF-Assist Illuminator
- Changes to Hi-Res Zoom
- New Video Playback i Menu Item: “Playback Speed”
- “Customize Retouch Options” Added to “Retouch” Playback i Menu
- New Item for “Series Playback” in Playback Menu: ”Auto Series Playback Options”
- New Playback Menu Item: “Auto Image Rotation”
- Separate Shooting Modes Now Configurable for Photo and Video Modes
- “Focus Point Border Width” Added to Custom Setting a11 “Focus Point Display”
- New Custom Setting: a14 “Max. Aperture Lv During MF”
- New Custom Settings: d19/g17 “Half-Press to Cancel Zoom (MF)”
- New Options for Custom Settings f1/g1 “Customize i Menu”
- Exposure Compensation and White Balance Now Changeable During Shooting Function Recall
- New Roles for Custom Settings f2 “Custom Controls (Shooting)” and g2 “Custom Controls”
- New Roles for Custom Setting f3 “Custom Controls (Playback)”
- Changes in Full Formatting Procedures for “Format Memory Card” in the Setup Menu
- Shooting Display Maximum Zoom Now 400%
- Memory Card High-Temperature Warning Position Changed
- New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”
- FTP Port Number Now Specifiable in FTP Connection Settings
- New Option for “Connect to FTP Server” in Network Menu: “Upload in HEIF Format”
- Using AirGlu Accessories While MC-N10 Remote Grips Connected
- Menu Items and Defaults for “C” Firmware Version 5.00
- Post-Upgrade Specifications for “C” Firmware Version 5.00
- Index
Camera: Obtain or select an IP address.
Highlight one of the following options and press J
.
Camera: Start a Wi-Fi connection with the smart device.
When prompted, launch the SnapBridge app on the smar
t
device.
Option Description
[Obtain automatically]
Select this option if the network is configur
ed to supply the IP
address automatically. A “configuration complete” message will be
displayed once an IP address has been assigned.
[Enter manually]
Enter the IP addr
ess and sub-net mask manually.
Press J
; you will be prompted to enter the IP address.
Rotate the main command dial to highlight segments.
Press 4 or 2 to change the highlighted segment and press J
to proceed.
Next, press X; a “configuration complete” message will be
displayed. Press X again to display the sub-net mask.
Press 1 or 3 to edit the sub-net mask and press J; a
“configuration complete” message will be displayed.
Camera: Press J t
o proceed when the “
configuration complete” message is displayed.
Smart device: Launch the SnapBridge app, open the
tab, tap , and select [Wi-Fi STA
Mode Connection].
If this is the first time y
ou have launched the app, you should instead tap [Connect to camera]
in the welcome display.
49
New Smart Device Connection Method: “Wi-Fi
Connection (ST
A Mode)”
6
7
8
9