Manual cu modificările aduse de actualizarea firmware

Table Of Contents
Profoto A10 Now Usable as AF-Assist
Illuminator
The Pro
foto A10's continuous LED light can now be used as an AF-assist illuminator when the Profoto
A10 (on-camera flash) is attached to the camera. When a Profoto A10 configured to act as an AF-assist
illuminator is attached, it will light regardless of the setting for Custom Setting a12 [Built-in AF-assist
illuminator].
If the Profoto A10 is not configured to act as an AF-assist illuminator, the camera's AF-assist
illuminator will light in accordance with the setting set for Custom Setting a12.
To use the Profoto A10 as an AF-assist illuminator, you will need to install the latest firmware version
for the Profoto A10. Refer to the documentation for the Profoto A10 for instructions on how to
update the firmware and use the Profoto A10.
25
Profoto A10 Now Usable as AF-Assist Illuminator