Manual cu modificările aduse de actualizarea firmware

Changes and Additions to Auto Capture
Functions
Changes and additions hav
e been made to the [Aut
o capture] functions in the photo shooting and
video recording menus.
Compatibility with the Camera’s Manual Focus
Setting
In earlier versions o
f the camera firmware, when shooting with manual focus, the camera required you
to set the lens focus-mode switch to [M], but starting with “C” firmware version 5.00, you can focus
manually by simply selecting manual focus on the camera.
The area used for subject detection can now be enabled and disabled with [Target area] if [Capture
criteria] > [Distance] is deselected in manual focus mode.
D Cautions: “Capture Criteria“ > “Distance”
Pressing the AF-ON button or the shutter-release button to set the distance in manual focus saves
the current focus position. Before pressing either button, adjust the focus position by rotating the
focus or control ring on the lens.
The accuracy of the camera detecting the distance to a subject may drop if the subject is
significantly out of focus.
DX Image Area Support
In earlier versions o
f the camera firmware, only FX could be selected for the image area when using
auto capture, but starting with “C” firmware version 5.00, DX image area is also supported.
Auto capture cannot be used when the image area is set to [1:1 (24×24)] or [16:9 (36×20)] in
photo mode.
New Release Mode Options : “C15” and “C60”
You can now use release mode [C15] with camera “C” fir
mware version 5.00.
Earlier versions of the camera firmware changed the [C60] option to [C120] when selected; camera
“C” firmware version 5.00 provides support for [C60].
21
Changes and Additions to Auto Capture Functions