Manual cu modificările aduse de actualizarea firmware
Table Of Contents
- Table of Contents
- Changes with “C” Firmware Version 5.00
- Features Available with “C” Firmware Version 5.00
- Changes Made with “C” Firmware Version 5.00
- New Picture Control Item: “Rich Tone Portrait”
- New High-Speed Frame Capture + Option: C15
- New Image Quality Item Added for High-Speed Frame Capture + Shooting
- New Photo Shooting Menu Item to Select Noise Reduction Mode: “High ISO NR Mode”
- “Skin Softening” Added to Photo Shooting and Video Recording Menus
- “Portrait Impression Balance” Added to Photo Shooting and Video Recording Menus
- Frequency Setting Mode Added to High-Frequency Flicker Reduction Function
- Changes and Additions to Auto Capture Functions
- Compatibility with the Camera’s Manual Focus Setting
- DX Image Area Support
- New Release Mode Options : “C15” and “C60”
- Changes to Settings Displays and Setting Names
- Range Extended for “Advanced: Distance”
- Airplanes Added to Subject Detection Types
- “Set Start Day/Time” Added
- Yellow Frame During Auto Capture
- Profoto A10 Now Usable as AF-Assist Illuminator
- Changes to Hi-Res Zoom
- New Video Playback i Menu Item: “Playback Speed”
- “Customize Retouch Options” Added to “Retouch” Playback i Menu
- New Item for “Series Playback” in Playback Menu: ”Auto Series Playback Options”
- New Playback Menu Item: “Auto Image Rotation”
- Separate Shooting Modes Now Configurable for Photo and Video Modes
- “Focus Point Border Width” Added to Custom Setting a11 “Focus Point Display”
- New Custom Setting: a14 “Max. Aperture Lv During MF”
- New Custom Settings: d19/g17 “Half-Press to Cancel Zoom (MF)”
- New Options for Custom Settings f1/g1 “Customize i Menu”
- Exposure Compensation and White Balance Now Changeable During Shooting Function Recall
- New Roles for Custom Settings f2 “Custom Controls (Shooting)” and g2 “Custom Controls”
- New Roles for Custom Setting f3 “Custom Controls (Playback)”
- Changes in Full Formatting Procedures for “Format Memory Card” in the Setup Menu
- Shooting Display Maximum Zoom Now 400%
- Memory Card High-Temperature Warning Position Changed
- New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”
- FTP Port Number Now Specifiable in FTP Connection Settings
- New Option for “Connect to FTP Server” in Network Menu: “Upload in HEIF Format”
- Using AirGlu Accessories While MC-N10 Remote Grips Connected
- Menu Items and Defaults for “C” Firmware Version 5.00
- Post-Upgrade Specifications for “C” Firmware Version 5.00
- Index
Switch the frequency.
Rotate the sub-command dial t
o switch between [PRE1],
[PRE2], [PRE3], [PRE4], and [OFF].
[PRE1] through [PRE4] are configured to the following
frequencies by default. Reduce the flicker effect by selecting
a frequency suited to the light source or high-frequency LED
display.
[PRE1]: 7680 Hz
[PRE2]: 3840 Hz
[PRE3]: 2880 Hz
[PRE4]: 1920 Hz
If none of the options from [PRE1] to [PRE4] are successful
in reducing the flicker effect, use a custom frequency value
(
0 18).
Selecting [OFF] will result in the same behavior as in earlier
ver
sions of the camera firmware.
While in frequency setting mode, pressing the shutter-
release button will not take a picture.
-
-
-
-
Press J to exit frequency setting mode.
Exit frequency setting mode and r
eturn to the shooting display to enable photography.
D Cautions: High-Frequency Flicker Reduction
Even if you have configured a frequency, the effects of flicker in the shooting display may differ from
those seen in photographs.
Even if you have reduced the flicker effect by configuring a frequency, the flicker effect may return
after changing the shutter speed.
We recommend that you take test shots to identify the shutter speed that minimizes flicker and
banding.
17
Frequency Setting Mode Added to High-
Fr
equency Flicker R
eduction Function
3
4