Manual cu modificările aduse de actualizarea firmware
Table Of Contents
- Table of Contents
- Changes with “C” Firmware Version 5.00
- Features Available with “C” Firmware Version 5.00
- Changes Made with “C” Firmware Version 5.00
- New Picture Control Item: “Rich Tone Portrait”
- New High-Speed Frame Capture + Option: C15
- New Image Quality Item Added for High-Speed Frame Capture + Shooting
- New Photo Shooting Menu Item to Select Noise Reduction Mode: “High ISO NR Mode”
- “Skin Softening” Added to Photo Shooting and Video Recording Menus
- “Portrait Impression Balance” Added to Photo Shooting and Video Recording Menus
- Frequency Setting Mode Added to High-Frequency Flicker Reduction Function
- Changes and Additions to Auto Capture Functions
- Compatibility with the Camera’s Manual Focus Setting
- DX Image Area Support
- New Release Mode Options : “C15” and “C60”
- Changes to Settings Displays and Setting Names
- Range Extended for “Advanced: Distance”
- Airplanes Added to Subject Detection Types
- “Set Start Day/Time” Added
- Yellow Frame During Auto Capture
- Profoto A10 Now Usable as AF-Assist Illuminator
- Changes to Hi-Res Zoom
- New Video Playback i Menu Item: “Playback Speed”
- “Customize Retouch Options” Added to “Retouch” Playback i Menu
- New Item for “Series Playback” in Playback Menu: ”Auto Series Playback Options”
- New Playback Menu Item: “Auto Image Rotation”
- Separate Shooting Modes Now Configurable for Photo and Video Modes
- “Focus Point Border Width” Added to Custom Setting a11 “Focus Point Display”
- New Custom Setting: a14 “Max. Aperture Lv During MF”
- New Custom Settings: d19/g17 “Half-Press to Cancel Zoom (MF)”
- New Options for Custom Settings f1/g1 “Customize i Menu”
- Exposure Compensation and White Balance Now Changeable During Shooting Function Recall
- New Roles for Custom Settings f2 “Custom Controls (Shooting)” and g2 “Custom Controls”
- New Roles for Custom Setting f3 “Custom Controls (Playback)”
- Changes in Full Formatting Procedures for “Format Memory Card” in the Setup Menu
- Shooting Display Maximum Zoom Now 400%
- Memory Card High-Temperature Warning Position Changed
- New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”
- FTP Port Number Now Specifiable in FTP Connection Settings
- New Option for “Connect to FTP Server” in Network Menu: “Upload in HEIF Format”
- Using AirGlu Accessories While MC-N10 Remote Grips Connected
- Menu Items and Defaults for “C” Firmware Version 5.00
- Post-Upgrade Specifications for “C” Firmware Version 5.00
- Index
Assign [High-frequency flicker reduction] to a control
using Custom Setting f2 [Cust
om controls (shooting)].
Press and hold the control to which [High-frequency flicker
reduction] is assigned.
The camera will ent
er frequency setting mode.
Frequency Setting Mode Added to High-
Frequency Flicker R
eduction Function
A frequency setting mode has been added to the high-frequency flicker reduction function in photo
mode, allowing you to configure the frequency of the light source. Reduce the flicker effect by
selecting a frequency that is suitable for the light source.
Once you have configured a frequency, only values that are integer multiples of the cycle of the
configured frequency can be selected for the shutter speed during shooting. The shutter speed can
be changed without affecting the flicker reduction effect.
Since the frequencies of LED lighting and high-frequency LED displays vary from product to
product, you can save multiple frequencies that are each tailored to a product and switch between
them according to the situation.
By default, four frequency settings are available from [PRE1] (7680 Hz) through [PRE4] (1920 Hz).
The frequencies can also be adjusted.
If you have configured a frequency, the shutter speed should be slower than 1/(frequency) s.
Switching the Frequency
Four frequency settings are av
ailable by default. By assigning [High-frequency flicker reduction] to a
desired control in Custom Setting f2 [Custom controls (shooting)], you can switch frequencies while
viewing the shooting display.
16
Frequency Setting Mode Added to High-
Frequency Flicker R
eduction Function
1
2