Setting Guide (Auto Capture Edition)

Shooting continues while the trigger criteria are met, and
the frame advance rate can be chosen from [Continuous high-
speed], [Continuous low-speed], and high-speed frame capture
+ in photo mode. Choose a frame advance rate according to
your subject.
You can specify multiple trigger criteria, including direction
of motion (q), distance (w), and subject type (e). The trigger
criteria can be tailored to avoid wasted shots. The effects of the
chosen criteria can be previewed in live view.
You can choose the subject detection areas by enabling or
disabling specific points for use when [Auto-area AF] is selected
for AF-area mode. Auto capture will only trigger if a subject is
detected in at least one of the selected points. Use target-area
selection to disable points (points turn red) in areas of the frame
that are blocked by obstacles or can otherwise be ignored to
ensure reliable detection of the desired subject.
You can use autofocus for automatic focus on subjects that
meet the trigger conditions before shooting. This lets you take
advantage of the bokeh offered by wide-aperture lenses.
Features
[Auto capture] supports the following features:
6
What Is “Auto Capture”?