Setting Guide (Auto Capture Edition)
Table Of Contents
- Table of Contents
- Auto Capture: An Overview
- Using Auto Capture
- Using Auto Capture: Workflow
- Getting Ready
- Adjusting Camera Settings
- The Photo Shooting Menu “Auto Capture” Item
- “Capture Criteria”
- “Capture Criteria” > “Motion”
- “Capture Criteria” > “Distance”
- “Capture Criteria” > “Subject Detection”
- “Target Area”
- “Timing Options”
- The “View Settings” Dialog
- Choosing Start Day and Time
- Initiating Auto Capture
- User Presets
- Recommended Trigger Criteria
- Troubleshooting
Choosing Start Day and Time
Configure the date and time to start auto capture by pressing the g (Fn4) button on the settings
confirmation dialog. Auto capture will be performed for the configured duration starting on the set
date and time.
Option Description
[Set start day/time]
Select [Yes] to perform auto capture shooting for the configured duration
starting on the set date and time.
[Start day/time] Specify the date, hour, and minute to start shooting.
[Shooting duration]
Select the duration to perform auto capture from the following options: [No
limit], [1 hour], [2 hours], [3 hours]. If [No limit] is selected, auto capture
will continue until it is terminated manually.
39
Choosing Start Day and Time