Setting Guide (Auto Capture Edition)

Rotate the main command dial to choose a [Smallest] of [1] to [5].
Choose lower values to include smaller subjects, higher values to
restrict subject detection to larger subjects.
The apparent subject size (approximate percentage of the angle
of view) for each setting is listed below.
[1]: 2.5% or more
[2]: 5% or more
[3]: 10% or more
[4]: 15% or more
[5]: 20% or more
-
-
-
-
-
Subject detected at size of 20%
Choosing the Subject Size
Press i to save changes and return to the auto capture settings display.
Tip: Size
Subjects that meet the criterion for [Smallest] are shown by green boxes in the subject detection
display.
A [Smallest] of [1] makes it easier for the camera to detect subjects of a variety of sizes. We
recommend that you begin from a low value and then gradually raise it while checking the display
of green boxes in the subject detection display or taking test pictures until subject detection
functions as desired.
Tip: “Smallest”
If both [Motion] and [Subject detection] are chosen for [Capture criteria], the [Smallest] chosen for
the former will have no effect on the [Smallest] chosen for the latter. Changing the [Smallest] selected
in the motion settings display has no effect on the [Smallest] selected in the subject detection display.
The two conditions will be assessed separately, but only subjects that meet the criteria for both will
trigger auto capture.
33
“Capture Criteria”> “Subject Detection”