Setting Guide (Auto Capture Edition)
Table Of Contents
- Table of Contents
- Auto Capture: An Overview
- Using Auto Capture
- Using Auto Capture: Workflow
- Getting Ready
- Adjusting Camera Settings
- The Photo Shooting Menu “Auto Capture” Item
- “Capture Criteria”
- “Capture Criteria” > “Motion”
- “Capture Criteria” > “Distance”
- “Capture Criteria” > “Subject Detection”
- “Target Area”
- “Timing Options”
- The “View Settings” Dialog
- Choosing Start Day and Time
- Initiating Auto Capture
- User Presets
- Recommended Trigger Criteria
- Troubleshooting
Tip: Size and Speed
Subjects that meet the criteria for [Smallest] and [Slowest] are shown by green boxes in the motion
settings display.
Selecting [1] for both [Smallest] and [Slowest] makes it easier for the camera to detect subjects of
a variety of sizes moving at a variety of speeds. We recommend that you begin from low values and
then gradually raise them while checking the display of green boxes in the motion settings display
or taking test pictures until subject detection functions as desired.
Even when [Slowest] and [Smallest] are set to the same value, how the camera detects subjects will
differ depending on the camera settings. Reset the values for [Slowest] and [Smallest] after:
switching photo mode to video mode or vice versa,
selecting a different release mode, or
changing video frame rate settings.
Tip: “Smallest”
If both [Motion] and [Subject detection] are chosen for [Capture criteria], the [Smallest] chosen for
the former will have no effect on the [Smallest] chosen for the latter. Changing the [Smallest] selected
in the subject detection display has no effect on the [Smallest] selected in the motion settings display.
The two conditions will be assessed separately, but only subjects that meet the criteria for both will
trigger auto capture.
28
“Capture Criteria”> “Motion”
-
-
-