Setting Guide (Auto Capture Edition)

Table Of Contents

Rotate the main command dial to choose a [Slowest] of [1]

to [5]. Choose lower values to include subjects moving at

slower speeds, higher values to restrict subject detection to faster-

moving subjects.

Rotate the sub-command dial to choose a [Smallest] of [1] to [5].

Choose lower values to include smaller subjects, higher values to

restrict subject detection to larger subjects.

The apparent subject size (approximate size in points) for each

setting is listed below.

[1]: 4 points or larger

[2]: 8 points or larger

[3]: 14 points or larger

[4]: 24 points or larger

[5]: 34 points or larger

Subject detected in 14 points

Choosing the Subject Speed and Size

Choose the speed and apparent size of subjects that will trigger auto capture.

Speed is measured as the time taken for the subject to cross the frame horizontally. The

approximate time for each value is listed below.

[1]: Approximately 5s or less

[2]: Approximately 4s or less

[3]: Approximately 3s or less

[4]: Approximately 2s or less

[5]: Approximately 1s or less

Press i to save changes and return to the auto capture settings display.

“Capture Criteria”> “Motion”