Manual cu modificările aduse de actualizarea firmware

Highlight the desired slot and press 2.
Remote camera options will be display
ed.
Highlight [Address] and press 2.
You will be prompt
ed to enter an IP address.
Enter the remote camera IP address.
To view a remote camera’s IP address, select [Connect to other
cameras]> [
Network settings] in the camera’s network menu,
highlight a synchronized release host profile, press 2, and
select [TCP/IP].
Enter the remote camera IP address you noted in Step7.
Rotate the main command dial t
o highlight segments.
Press 4 or 2 to change the highlighted segment and press J to proceed.
Press X to add the remote camera to the master camera remote camera list and establish a
connection.
Tip: Viewing Remote Camera IP Addresses
55
Changes to Synchronized Release
15
16
17