Manual cu modificările aduse de actualizarea firmware

Select the desired mode (photo or video) using the photo/
video selector.
If you are using auto capture for photographs, select
a continuous release mode: [Continuous high-speed
],
[Continuous low-speed], [C30], or [C120].
If you are using auto capture to record videos, proceed to
Step 4.
If single-frame or self-timer mode is selected, the camera
will temporarily switch to continuous high-speed mode
when auto capture begins.
Taking Pictures Using Auto Capture
D Before Shooting
To ensur
e that shooting is not interrupted, use a fully-charged battery, the supplied charging AC
adapter, or an optional AC adapter and power connector.
Mount the camera on a tripod or take other steps to hold it steady.
Fix the camera in place after framing the shot.
Tip: Framing the Shot
We recommend that you choose a wider angle than usual until you have grown used to auto
capture.
If [C60] is selected, the release mode will change to [C120].
If you selected continuous low-speed or continuous high-speed mode, choose the frame
advance rate before proceeding.
14
New Menu Item: “Auto Capture”
1
2
3