Manual cu modificările aduse de actualizarea firmware

Option Description
[Advanced: Subject detection]
This option will take effect only if [Subject detection] is selected
(
M) for [Capture criteria]. It is used to choose the type and size
of subjects that will trigger auto capture (
0 24).
[Advanced: Distance]
This option will take effect only if [Distance] is selected (M
) for
[Capture criteria]. It is used to choose the range of distances
at which the presence of a subject will trigger auto capture
(
0 26). Shooting will continue while the subject is within the
specified range of distances.
[T
arget area]
Choose the focus points used for subject detection when
[Auto-area AF] is selected for AF-area mode. Auto capture
will be triggered if a subject that meets the trigger conditions
is detected in any of the selected focus points. Target-area
selection can be used to disable focus points in areas of the
frame that are blocked by obstacles or can otherwise be ignored
for purposes of subject detection, ensuring that the desired
subject can be detected more reliably.
[Timing options]
Choose values for [Recording time selection] and [Wait after
shooting].
[Recording time selection]: Choose how long the camera will
shoot once auto capture is triggered. Shooting will continue
for the selected time even if the trigger conditions are no
longer met.
Depending on camera settings, shooting may end before
the expiration of the selected time.
[Wait after shooting]: Choose the minimum time the camera
will wait after a burst. Once the burst is complete, shooting
will pause for the selected duration even if the trigger
conditions are met.
13
New Menu Item: “Auto Capture”
-