DIGITAL CAMERA User’s Manual En • Read this document thoroughly before using the camera. • To ensure proper use of the camera, be sure to read “For Your Safety” (page 8). • After reading this document, keep it readily accessible for future reference. Scan for detailed operating instructions.
Before You Begin The Z 8 User’s Manual and Reference Guide In addition to this User’s Manual, a Reference Guide is available for your camera. The User’s Manual (This Document) The User’s Manual describes basic camera operations. The Reference Guide Camera features and operations are detailed in a Reference Guide, a supplement to the User’s Manual. The Reference Guide can be viewed on computers, smartphones, and tablets.
Downloading Documentation and Software The Nikon Download Center Documentation for digital cameras, NIKKOR lenses, and flash units is available from the Nikon Download Center, as are firmware updates and NX Studio and other software. https://downloadcenter.nikonimglib.com/ Downloading Nikon Software • Computer Software Nikon software is available from the Nikon Download Center. NX Studio: View and edit photos and videos shot with Nikon digital cameras.
Package Contents Be sure all items listed here were included with your camera. • Camera body • BS-1 accessory shoe cover (comes attached to camera) • DK-33 rubber eyecup (comes attached to camera) • BF-N1 body cap • Memory cards are sold separately.
About This Document Symbols This document employs the following symbols. Use them to help locate the information you need. D This icon marks notes, information that should be read before using this product. Tip This icon marks tips, additional information you may find helpful when using this product. 0 This icon marks references to other sections in this document. Conventions • This camera uses CFexpress (Type B), XQD, SD, SDHC, and SDXC memory cards.
Table of Contents Before You Begin 2 The Z 8 User’s Manual and Reference Guide.......................................................2 Downloading Documentation and Software..................................................3 The Nikon Download Center....................................................3 Downloading Nikon Software..................................................3 Package Contents......................................................................................................
Basic Photography and Playback 39 Taking Photographs................................................................................................39 Recording Videos.....................................................................................................43 Playback.......................................................................................................................46 Troubleshooting 47 Before Contacting Customer Support.....................................................
For Your Safety To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product. After reading these safety instructions, keep them readily accessible for future reference. A DANGER: Failure to observe the precautions marked with this icon carries a high risk of death or severe injury. A WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.
A WARNING Keep dry. Do not handle with wet hands. Do not handle the plug with wet hands. Failure to observe these precautions could result in fire or electric shock. Do not let your skin remain in prolonged contact with this product while it is on or plugged in. Failure to observe this precaution could result in low‑temperature burns. Do not use this product in the presence of flammable dust or gas such as propane, gasoline or aerosols. Failure to observe this precaution could result in explosion or fire.
A WARNING Do not use batteries, chargers, or AC adapters not specifically designated for use with this product. When using batteries, chargers, and AC adapters designated for use with this product, do not: • Damage, modify, forcibly tug or bend the cords or cables, place them under heavy objects, or expose them to heat or flame. • Use travel converters or adapters designed to convert from one voltage to another or with DC-to-AC inverters.
A CAUTION Turn this product off when its use is prohibited. Disable wireless features when the use of wireless equipment is prohibited. The radio-frequency emissions produced by this product could interfere with equipment onboard aircraft or in hospitals or other medical facilities. Remove the battery and disconnect the AC adapter if this product will not be used for an extended period. Failure to observe this precaution could result in fire or product malfunction.
A CAUTION Keep the product at least 5 cm (2.0 in.) from pacemakers and other medical devices. Medical devices in close proximity could be affected by the magnet or magnets in the product. A DANGER (Batteries) Do not mishandle batteries. Failure to observe the following precautions could result in the batteries leaking, overheating, rupturing, or catching fire: • Use only rechargeable batteries approved for use in this product. • Do not expose batteries to flame or excessive heat. • Do not disassemble.
A WARNING (Batteries) Keep batteries out of reach of children. Should a child swallow a battery, seek immediate medical attention. Keep batteries out of reach of household pets and other animals. The batteries could leak, overheat, rupture, or catch fire if bitten, chewed, or otherwise damaged by animals. Do not immerse batteries in water or expose to rain. Failure to observe this precaution could result in fire or product malfunction.
Notices • No part of the documentation included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission. • Nikon reserves the right to change the appearance and specifications of the hardware and software described in this documentation at any time and without prior notice. • Nikon will not be held liable for any damages resulting from the use of this product.
• Cautions on certain copies and reproductions The government has issued cautions on copies or reproductions of securities issued by private companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except when a minimum of necessary copies are to be provided for business use by a company. Also, do not copy or reproduce passports issued by the government, licenses issued by public agencies and private groups, ID cards, and tickets, such as passes and meal coupons.
• Memory Cards • Memory cards may be hot after use. Observe due caution when removing memory cards from the camera. • Do not perform the following operations during formatting or while data are being recorded, deleted, or copied to a computer or other device. Failure to observe these precautions could result in loss of data or in damage to the camera or card. - Do not remove or insert memory cards. - Do not turn the camera off. - Do not remove the battery. - Do not disconnect AC adapters.
D Before Taking Important Pictures Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
Parts of the Camera Camera Body 1 2 3 4 5 6 7 8 9 10 9 15 14 1 2 3 4 5 6 7 11 13 BKT button (D) WB button (U) Stereo microphone Video-record button Power switch Shutter-release button ISO sensitivity button (S) FORMAT button (Q) 8 Exposure compensation button (E) 18 Camera Body 12 9 Eyelet for camera strap 10 Speaker 11 Focal plane mark (E) 12 Control panel 13 Accessory shoe (for optional flash unit) 14 MODE button (I) 15 Release mode button (c)
1 2 3 4 5 7 6 8 9 10 11 12 13 14 15 16 1 AF-assist illuminator 2 3 4 5 6 7 8 Red-eye reduction lamp Self-timer lamp Monitor mode button (M) Ten-pin remote terminal cover Cover for microphone, headphone, and HDMI connectors USB connector cover Focus-mode button Lens mounting mark Ten-pin remote terminal 9 Charge lamp 10 Connector for external microphone 11 HDMI connector 12 Headphone connector 13 USB data connector 14 Threaded hole for HDMI/USB cable clip 15 USB Power Delivery connector 16 Body cap
7 6 5 4 3 2 1 1 Monitor 2 Eyepiece release 3 Delete button (O) FORMAT button (Q) 4 Protect button (g) Fn3 button (l) 20 Camera Body 5 Rubber eyecup 6 Viewfinder 7 Eye sensor
123 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 Diopter adjustment control DISP button (d) Photo/video selector AF-ON button (B) Sub-selector Main command dial “i” button (i) Memory card access lamp 9 OK button (J) 10 Multi selector 11 Playback zoom in button (X) 12 MENU button (G) 13 Playback button (K) 14 Playback zoom out/thumbnails button (W) Help button (Q) Camera Body 21
1 11 2 3 4 10 9 5 8 6 7 1 2 3 4 5 6 22 Lens release button Lens mount CPU contacts Image sensor Tripod socket Battery chamber cover Camera Body 7 Battery chamber cover latch 8 Memory card slot cover 9 Fn2 button (k) 10 Fn1 button (j) 11 Sub-command dial
First Steps Attaching the Strap To attach a strap, follow the steps below.
Charging the Battery Charge the supplied EN-EL15c battery before use. D Caution: The Battery and Charger Read and follow the warnings and cautions in “For Your Safety” ( 0 8) and “Caring for the Camera and Battery: Cautions ” ( 0 49). The Battery Charger Depending on the country or region, the charger comes with either an AC wall adapter or a power cable.
• An exhausted battery will fully charge in about 2 hours and 35 minutes. Battery charging (flashes) Charging complete (steady) D If the CHARGE Lamp Flashes Rapidly If the CHARGE lamp flashes rapidly (8 times a second): • The battery was not inserted correctly: Unplug the charger and remove and reinsert the battery. • The ambient temperature is too hot or too cold: Use the battery charger at temperatures within the designated temperature range (0–40 °C/+32–104 °F).
Optional Charging AC Adapters: Charging When inserted in the camera, the battery can be charged using an optional EH-7P charging AC adapter. • An exhausted battery will fully charge in about 2 hours and 40 minutes. • When charging is complete, unplug the charging AC adapter and disconnect it from the camera. ■ Charging After confirming that the camera is off, connect the charging AC adapter (q) to the camera’s USB Power Delivery connector (w) and plug the adapter in.
D Cautions: The Charging AC Adapter • The battery will not charge if the charging AC adapter is connected to the camera’s USB data connector. • The charging AC adapter can be used only with EN‑EL15c and EN‑EL15b batteries. EN‑EL15a batteries can be charged using an MH‑25a battery charger. • Charging errors caused by, for example, elevated camera temperatures or attempts to charge an EN‑EL15a are indicated by the charge lamp flashing rapidly for about 30 seconds before turning off.
Tip: Computer USB Power Delivery and Battery Charging Computers will supply current to power the camera or charge the battery only via an optional UC‑E25 USB cable (which has Type C connectors at both ends) connected to a built-in Type C USB port on the computer. • The supplied UC‑E24 USB cable (which connects to the camera via a Type C connector and to USB devices via a Type A connector) cannot be used for this purpose. • Connect the USB cable to the camera’s USB Power Delivery connector.
Inserting the Battery • Turn the camera off before inserting or removing the battery. • Using the battery to keep the orange battery latch pressed to one side, slide the battery into the battery chamber until the latch locks it in place. Removing the Battery To remove the battery, turn the camera off and open the battery chamber cover. Press the battery latch in the direction shown by the arrow to release the battery and then remove the battery by hand.
Battery Level • The battery level is shown in the shooting display and control panel while the camera is on. Monitor Viewfinder Control panel • The battery level display changes as the battery level diminishes, from L through K, J, I, and H. When the battery level falls to H, suspend shooting and charge the battery or ready a spare battery. • If the message [Shutter release disabled. Recharge battery.] is displayed, charge or exchange the battery.
Inserting Memory Cards The camera is equipped with two memory card slots: a slot that takes one CFexpress or XQD memory card (q) and another that takes one SD memory card (w), for a total of two cards, one of each type. 128GB • Turn the camera off before inserting or removing memory cards. • Holding the memory card in the orientation shown, slide it straight into the slot until it clicks into place.
Tip: Number of Exposures Remaining • The shooting display and control panel show the number of photographs that can be taken at current settings. • Values over 1000 are rounded down to the nearest hundred. For example, values between 8000 and 8099 are shown as 8.0 k. • If no memory cards are inserted, an [–E–] indicator will be displayed. Tip: The Write Protect Switch • SD memory cards are equipped with a write-protect switch.
After confirming that the memory card access lamp is off, turn the camera off, open the memory card slot cover, and press the card in to eject it (q). The card can then be removed by hand (w). 128GB Removing Memory Cards D Memory Card High-Temperature Warning As indicated in the label inside the memory card slot cover, memory cards may become hot while inserted in the camera. Wait for any high-temperature warnings to clear from the shooting display before handling the camera and memory cards.
Attaching a Lens • The camera can be used with Z mount lenses. For more information on lenses, see the lens documentation available from the Nikon Download Center. • The lens generally used in this document for illustrative purposes is a NIKKOR Z 50mm f/1.8 S. • Be careful to prevent dust entering the camera. • Confirm that the camera is off before attaching the lens. - Remove the camera body cap (q, w) and rear lens cap (e, r). - Align the mounting marks on the camera (t) and lens (y).
- Rotate the lens as shown until it clicks into place (u). • Remove the front lens cap before taking pictures. D F Mount Lenses • Be sure to attach an FTZ II or FTZ mount adapter (available separately) to the camera before using F mount lenses. • Attempting to attach F mount lenses directly to the camera could damage the lens or image sensor. Detaching Lenses • After turning the camera off, press and hold the lens release button (q) while turning the lens in the direction shown (w).
Camera Setup Turn the camera on, choose a language, and set the clock. Before using the camera for the first time, follow the steps below to choose a language and time zone and set the clock so that the correct time and date will be recorded with any pictures you take. G, and in the setup menu 1 Press highlight [Language] and press 2. 2 Select a language.
4 Choose a time zone. • Select [Time zone] in the [Time zone and date] display. • The display lists selected cities in the chosen zone and the difference between the time in the chosen zone and UTC. • Highlight a time zone in the [Time zone] display and press J. 5 Turn daylight saving time on or off. • Select [Daylight saving time] in the [Time zone and date] display. • Select [ON] (daylight saving time on) or [OFF] (daylight saving time off ).
7 Choose a date format. • Select [Date format] in the [Time zone and date] display. • Highlight the desired date (year, month, and day) display order and press J. 8 Exit the menus. Lightly press the shutter-release button halfway to exit to shooting mode. D The t Icon A flashing t icon in the shooting display indicates that the camera clock has been reset.
Basic Photography and Playback Taking Photographs The basic steps involved in taking photographs are described below. D Lenses with Retractable Barrels Lenses with retractable barrels must be extended before use. Rotate the zoom ring as shown until the lens clicks into place in the extended position. photo mode by rotating the 1 Select photo/video selector to C.
2 Ready the camera. Holding the handgrip in your right hand and cradling the camera body or lens with your left, bring your elbows in against the sides of your chest. Landscape (wide) orientation 3 Frame the photograph. Portrait (tall) orientation Position the main subject near the center of the frame.
To focus, press the shutter-release 4 button halfway (i.e., lightly press the shutter-release button, stopping when it is pressed halfway). • The focus point will be displayed in green when the subject is in focus. If the camera is unable to focus, the focus point will flash red. • The AF-assist illuminator may light to assist the focus operation if the subject is poorly lit. • You can also focus by pressing the AF‑ON button.
lifting your finger from the 5 Without shutter-release button, press the button the rest of the way down to take the picture. D The Memory Card Access Lamp The memory card access lamp will light while the photograph is being recorded. Do not remove the memory card or battery. Tip: The Touch Shutter You can also take a photograph by touching the monitor. Touch your subject to focus and lift your finger to release the shutter.
Recording Videos The basic steps involved in recording videos are described below. video mode by rotating the 1 Select photo/video selector to 1. Note that optional flash units cannot be used when the camera is in video mode. the video-record button to start 2 Press recording. • A recording indicator will be displayed and the borders of the shooting display will turn red.
• The camera can be refocused during recording by pressing the AF-ON button. • Sound is recorded via the built-in microphone. Do not cover the microphone during recording. • You can also focus by tapping your subject in the monitor. 3 Press the video-record button again to end recording. D The Memory Card Access Lamp The memory card access lamp will light while the video is being recorded. Do not remove the memory card or battery. D The 0 Icon A 0 icon indicates that videos cannot be recorded.
D Cautions: Recording Videos • Video recording will end automatically if: - the maximum length is reached, - the battery is exhausted, - you choose a different shooting mode, - you switch modes using the photo/video selector, - the lens is removed, or - the camera’s internal temperature rises. • Sounds made by the camera may be audible in footage recorded: - during autofocus, - during vibration reduction, or - when power aperture is used.
Playback Press the K button to view photos and videos in the monitor or viewfinder after shooting. • Press 4 or 2 or flick left or right to view additional pictures. • Videos are indicated by a 1 icon at the top left corner of the display. Tap the a icon in the display or press the J button to start playback. • To end playback and return to shooting mode, press the shutterrelease button halfway.
Troubleshooting Before Contacting Customer Support You may be able to resolve any issues with the camera by following the steps below. Check this list before consulting your retailer or Nikonauthorized service representative. 1 2 3 4 Check the list of common problems. Common problems and solutions are listed in the troubleshooting section of the Reference Guide. Turn the camera off and remove the battery, then wait about a minute, re-insert the battery and turn the camera on.
Technical Notes Caring for the Camera Long-Term Storage Remove the battery if the product will not be used for an extended period. Before removing the battery, confirm that the camera is off. Do not store the camera in locations that: • are poorly ventilated or subject to humidities of over 60%, • are next to equipment that produces strong electromagnetic fields, such as televisions or radios, or • are exposed to temperatures above 50 °C (122 °F) or below −20 °C (−4 °F).
Caring for the Camera and Battery: Cautions Cautions: Using the Camera • Do Not Drop Do not drop the camera or lens or subject them to blows. The product may malfunction if subjected to strong shocks or vibration. • Keep Dry Keep the camera dry. Rusting of the internal mechanism caused by water inside the camera can not only be expensive to repair but can in fact cause irreparable damage.
• Lasers and Other Bright Light Sources Do not direct lasers or other extremely bright light sources toward the lens, as this could damage the camera’s image sensor. • Cleaning When cleaning the camera body, use a blower to gently remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt using a cloth lightly dampened in fresh water and then dry the camera thoroughly.
• Do Not Touch the Sensor Shield If [Sensor shield closes] is selected for [Sensor shield behavior at power off] in the setup menu, the sensor shield in front of the image sensor will close when the camera turns off. Never pierce or apply pressure to the sensor shield. Failure to observe this precaution could scratch or otherwise damage the shield. • The Lens Contacts Keep the lens contacts clean. Avoid touching them with your fingers.
• Turn the Product Off Before Removing or Disconnecting the Power Source Removing or disconnecting the power source while the camera is on could damage the product. Particular care should be taken not to remove or disconnect the power source while pictures are being recorded or deleted. • Monitor/Viewfinder • The monitor and viewfinder are constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective.
• Bright Lights and Back-Lit Subjects Noise in the form of lines may in rare cases appear in pictures that include bright lights or back-lit subjects. • Camera Shooting and Playback Displays When [HLG] is selected for tone mode, the shooting and playback displays in the camera monitor and viewfinder may include “noise” in the form of randomly-spaced bright pixels, fog, or lines or may fail to accurately reproduce highlights and highly-saturated colors.
Cautions: Using Batteries • Precautions for Use • If improperly handled, batteries may rupture or leak, causing the product to corrode. Observe the following precautions when handling batteries: - Turn the product off before replacing the battery. - Batteries may be hot after extended use. - Keep the battery terminals clean. - Use only batteries approved for use in this equipment. - Do not short or disassemble batteries or expose them to flame or excessive heat.
• Remove the battery from the camera or charger when not in use. The camera and charger draw minute amounts of charge even when off and could draw the battery down to the point that it will no longer function. • Do not use the battery at ambient temperatures below −10 °C (14 °F) or above 40 °C (104 °F). Failure to observe this precaution could damage the battery or impair its performance. Charge the battery indoors at ambient temperatures of 5 °C–35 °C (41 °F–95 °F).
• Charge Batteries Before Use Charge the battery before use. The supplied battery is not fully charged at shipment. • Ready Spare Batteries Before taking photographs, ready a spare battery and keep it fully charged. Depending on your location, it may be difficult to purchase replacement batteries on short notice. • Have Fully-Charged Spare Batteries Ready on Cold Days Partially-charged batteries may not function on cold days.
Cautions: Using the Charger • Do not move the charger or touch the battery during charging; failure to observe this precaution could in very rare instances result in the charger showing that charging is complete when the battery is only partially charged. Remove and reinsert the battery to begin charging again. • Do not short the charger terminals. Failure to observe this precaution could result in overheating and damage to the charger. • Unplug the charger when it is not in use.
Trademarks and Licenses • CFexpress is a trademark of the CompactFlash Association in the United States and other countries. • NVM Express is a trademark or registered trademark of NVM Express Inc. • XQD is a trademark of Sony Corporation. • The SD, SDHC, and SDXC logos are trademarks of SD-3C, LLC. • Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries.
• The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Nikon is under license. • Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi Alliance. • Powered by intoPIX technology. • All other trade names mentioned in this document or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders.
Notices • Notices for Customers in the U.S.A. The Battery Charger IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE INSTRUCTIONS DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet if needed. This power unit is intended to be correctly oriented in a vertical or floor mount position.
CAUTIONS Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment. Z8 Interface Cables Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.
• Notices for Customers in Europe CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. This symbol indicates that electrical and electronic equipment is to be collected separately.The following apply only to users in European countries: • This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
Bluetooth and Wi-Fi (Wireless LAN) This product is controlled by the United States Export Administration Regulations (EAR). The permission of the United States government is not required for export to countries other than the following, which as of this writing are subject to embargo or special controls: Cuba, Iran, North Korea, Sudan, and Syria (list subject to change). The use of wireless devices may be prohibited in some countries or regions.
Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted.
Co-location This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.: 631-547-4200 FCC/ISED RF Exposure Statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe.
Compliance with RSS-247 Issue 2 §6.4 Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted.
Wi-Fi • Operating frequency: - Europe (excluding the countries listed below), Israel, and Turkey: 2412–2472 MHz (channel 13) and 5180–5825 MHz (5180– 5700 MHz and 5745–5825 MHz) - Russia, Belarus, Kazakhstan, and Ukraine: 2412–2462 MHz (channel 11) and 5180–5320 MHz - Australia, New Zealand, and the Republic of Fiji: 2412–2462 MHz (channel 11) and 5180–5825 MHz (5180–5580 MHz, 5660– 5700 MHz, and 5745–5825 MHz) - U.S.A.
Bluetooth • Operating frequency: - Bluetooth: 2402–2480 MHz - Bluetooth Low Energy: 2402–2480 MHz • Maximum output power (EIRP): - Bluetooth: −4.1 dBm - Bluetooth Low Energy: −5.6 dBm • Notice for Customers in Europe Standby Power Consumption Mode Power consumption Standby/off mode Less than 0.
Wi-Fi • Operating frequency: - 2412–2472 MHz (channel 13) and 5180–5825 MHz (5180– 5700 MHz and 5745–5825 MHz) • Maximum output power (EIRP): - 2.4 GHz band: 1.4 dBm - 5 GHz band (5180–5320 MHz): 10.8 dBm - 5 GHz band (5500–5825 MHz): 7.8 dBm Bluetooth • Operating frequency: - Bluetooth: 2402–2480 MHz - Bluetooth Low Energy: 2402–2480 MHz • Maximum output power (EIRP): - Bluetooth: −4.1 dBm - Bluetooth Low Energy: −5.
Warranty Terms - Nikon Europe Service Warranty Dear Nikon Customer, We thank you for your purchasing this Nikon product. Should your Nikon product require warranty service, please contact the dealer from whom it was purchased or a member of our authorized service network within the sales territory of Nikon Europe B.V. (e.g. Europe/Russia/ others). See details under: https://www.europe-nikon.
2. This warranty will not cover: • necessary maintenance and repair or replacement of parts due to normal wear and tear. • modifications to upgrade the product from its normal purpose as described in user manuals, without the prior written consent of Nikon. • transport costs and all risks of transport relating directly or indirectly to the warranty of the products.
4. This service warranty does not affect the consumer’s statutory rights under applicable national laws in force, nor the consumer’s right against the dealer arising from their sales/purchase contract. Notice: An overview of all authorized Nikon Service Stations can be found online by following this Link (URL = https://www.europe-nikon.com/service/).
No reproduction in any form of this document, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. Out of concern for the environment, Nikon is working to reduce its use of paper.
