Reference Guide (PDF Edition)

Table Of Contents
Lens
MB-N12 FTZ
Precautions for Use
Observe the following pr
ecautions when using the MB-N12.
Touching the power/signal contacts with metal objects could cause a short-circuit; reattach the
contact cap before storing or transporting the battery pack or charging the batteries with the pack
not attached to the camera.
A warning may appear in the camera shooting display if the MB-N12 is not securely attached.
Securing the MB-N12 in place by tightening the attachment wheel until it will turn no further may
resolve the issue.
The camera memory card access lamp may light when the MB-N12 is attached to or removed from
the camera.
When using the camera with both the MB-N12 and an optional FTZ mount adapter attached,
connect tripods to the tripod mount on either the lens or the MB-N12, not to the tripod mount on
the FTZ.
The MB-N12 is not equipped with a power switch. Use the camera power switch to turn the camera
on and off.
D Camera Warning Messages
If the camera displays one of the following messages, take the steps described below.
If the camera displays the message [Shutter release disabled. Recharge battery.], insert a spare
battery. Turn the camera off before proceeding if the battery in question is inserted in ChamberB or
if there is only one battery in the holder and it is inserted in ChamberA.
If the camera displays the message [Error. Press shutter-release button to reset.], press the
shutter-release button. If the problem persists or recurs frequently, consult a Nikon-authorized
service representative.
886
Optional MB-N12 Power Battery Packs