Reference Guide (PDF Edition)

Table Of Contents
Remote repeating options can be viewed using the [Flash info]
it
em in the
i
menu, which can be added to the menu using Custom
Setting f1 [Customize i menu].
C/f: Take the photograph after confirming that the flash-ready lights for all flash units
are lit.
D Optical A
WL
Position the sensor windows on the remote flash units to pick up the light from the master flash.
Particular care is required if the master flash is mounted on a hand-held camera.
Be sure that direct light or strong reflections from the remote flash units do not enter the camera
lens (in [TTL] mode) or the photocells on the remote flash units ([qA] mode). Otherwise light from
the flash units may interfere with exposure.
Even if [--] is selected for [Master flash]> [Mode], the master flash may emit low-intensity timing
flashes. These flashes may appear in photographs taken at short range. This can be prevented by
choosing low ISO sensitivities or small apertures (high f-numbers).
After positioning the remote flash units, take a test shot and view the results in the camera display.
Tip: Flash Info
417
Optical AWL
7