Reference Guide (PDF Edition)

Table Of Contents
Frame the photograph and focus.
The timer will not start if the shutter cannot be r
eleased, as
may be the case, for example, if the camera is unable to focus
when AF‑S is selected for focus mode.
Start the timer.
Press the shutter-release button all the way down to start
the timer; the self-timer lamp will begin t
o flash. The lamp
stops flashing two seconds before the timer expires.
Using the Self-Timer (E)
In self-timer mode, pressing the shutt
er-release button all the way down starts a timer, and a photo is
taken when the timer expires.
Hold the c button and rotate the main command dial to select E.
Hold the c button and rotate the sub-command dial to choose the self-timer delay.
The timer duration, the number of shots taken, and the interval between shots can be
selected using Custom Setting c2 [Self-timer].
138
Release Mode
1
2
3
4