Додатковий посібник з оновлення мікропрограми
Table Of Contents
- Table of Contents
- Changes with “C” Firmware Version 2.00
- Features Available with “C” Firmware Version 2.00
- Changes Made with “C” Firmware Version 2.00
- New AF Subject Detection Option: “Birds”
- New Bracketing Increments
- New Items Added to Picture Control
- Addition of “Large” to Size Options Available for “JPEG Primary - JPEG Secondary” and “HEIF Primary - HEIF Secondary”
- New Menu Item: “Pixel Shift Shooting”
- New Menu Item: “Auto Capture”
- More Time for Pre-Release Capture
- New: Slow-Motion Videos
- Color Change to Hi-Res Zoom In-Focus Display
- Low ISO Sensitivity Settings for N-Log Video
- Changes to Hi-Res Zoom Speeds Available in g8 “Hi-Res Zoom Speed” in the Custom Settings Menu
- Changes to i-Menu “Select for Upload” Options
- Priority Upload Options Added to i Menu
- Addition of “Playback Speed” Item to the Video Playback i Menu
- Addition of “Auto Series Playback Options” to “Series Playback” in Playback Menu
- Addition of “Auto Image Rotation” to Playback Menu
- Support for Power Zoom
- Addition of “Focus Point Border Width” Item to a11 “Focus Point Display” in the Custom Settings Menu
- New Custom Setting: d5 “Exposure Delay Mode”
- Addition of “Half-Press to Cancel Zoom (MF)” Item to d18 and g17 in the Custom Settings Menu
- Exposure Compensation and White Balance Now Changeable During Shooting Function Recall
- New Options for Custom Settings f2 “Custom Controls (Shooting)” and g2 “Custom Controls”
- New Options for Custom Setting f3 “Custom Controls (Playback)”
- Changes to Method for Performing a Full Format with “Format Memory Card” in the Setup Menu
- Updates to “Non-CPU Lens Data”
- Changes to Character Limit for “Category” Entries when Editing Presets with “IPTC” in the Setup Menu
- Changes to Setup Menu “Camera Sounds” Options
- Shooting Display Maximum Magnification Increased to 400%
- “Finder Display Size (Photo Lv)” Changed to “Viewfinder Display Size” in the Setup Menu
- Updated Distance Display for Manual Focus
- Changes and Additions to “Connect to FTP Server”
- Changes to Synchronized Release
- New “Overwrite Copyright Info” Option for Master Cameras
- Using AirGlu Accessories While MC-N10 Remote Grips Connected
- Menu Items and Defaults for “C” Firmware Version 2.00
- Post-Upgrade Specifications for “C” Firmware Version 2.00
- Index
Select [USB-LAN] for [USB data connection] in the network
menu.
Ethernet
Follow the steps below t
o create host profiles for Ethernet connections. A USB (Type C) to Ethernet
adapter (available separately from third-party sources) is required for Ethernet connections. Be sure to
connect the adapter to the camera’s USB data connector.
The following USB-to-Ethernet adapters have been tested and approved for use:
Anker A83130A1 PowerExpand USB‑C to Gigabit Ethernet adapters
Anker A83130A2 PowerExpand USB‑C to Gigabit Ethernet adapters
Note that USB-to-Ethernet adapters will not function when connected to the camera’s USB Power
Delivery connector.
Connect to other cameras via a third-party USB (Type C) to Ethernet adapter connected to the camera’s
USB data connector.
Attach a third-party USB-to-Ethernet adapter to the camera’s USB data connector and
then connect to a router using an Ethernet cable.
Connect the Ethernet cable to the USB-to-Ethernet adapter. Do not use force or attempt to
insert the connectors at an angle.
Connect the other end of the cable to a router.
Connect the remaining cameras to the router using Ethernet cables.
79
Changes to Synchronized Release
-
-
1
2