User's Manual

En_03
28 Charging the Battery
D Cautions: The EH‑7P/EH‑8P
• The battery will not charge if the cable is connected to the camera’s
USB data connector.
• The EH-7P and EH-8P can be used only with EN-EL15c and EN-EL15b
batteries. EN-EL15a batteries can be charged using an MH-25a
battery charger.
• Charging errors caused by, for example, elevated camera
temperatures or attempts to charge an EN-EL15a are indicated by the
charge lamp flashing rapidly for about 30seconds before turning off.
• After the charge lamp turns off, we recommend that you turn the
camera on (or activate the standby timer) and confirm that the
battery is charged.
Tip: The EH‑7P/EH‑8P: Power Delivery
If [ON] is selected for [USB power delivery] in the setup menu, power
will be supplied to the camera when the camera is on.
• Connect the cable to the camera’s USB Power Delivery connector. The
adapter will not supply power to the camera when connected via the
USB data connector.
• Power will only be supplied to the camera when the battery is
inserted.
• The battery will not charge while the camera is powered by an
outside power source.