Setting Guide (For Still Photography)

58
This section focuses on [Interval timer shooting]. The set-
tings for [Time-lapse movie] are essentially the same.
Advance Preparation
Ready a Power SourceReady a Power Source
• Ready a fully-charged battery.
• Where AC power is available, we recommend using an
EH -7P charging AC adapter (available separately for the
Z6II, supplied with the Z7II) or an optional EP-5B power
connector and EH-5d, EH-5c, or EH-5b AC adapter.
• We also recommend the optional MB-N11 power battery
pack or MB-N10 battery pack, which when used with
two batteries can supply power longer than the camera
alone. With spare batteries, you can take advantage of
the MB-N11 and MB-N10’s “hot swap” feature to replace
batteries while shooting is in progress, ensuring a contin-
uous supply of power for even longer periods.
• The camera can also be powered via USB by an Anker
PowerCore+ 26800 PD 45W power bank (recommended).
Ready Memory CardsReady Memory Cards
Ready memory cards with sucient capacity after picking
an image size, image quality (JPEG, NEF/RAW, or JPEG +
NEF/RAW), total shooting time, and interval and taking a
test shot to help you get an idea of the le size.
Set the ClockSet the Clock
Check that the camera clock is set correctly before pro-
ceeding.
l
Time‑Lapse Recording: Preparation and Basic Settings