User's Manual
Table Of Contents
- Package Contents
- Table of Contents
- For Your Safety
- Notices
- Getting to Know the Camera
- First Steps
- Basic Photography and Playback
- Basic Settings
- Shooting Controls
- The i Menu
- Menu List
- Troubleshooting
- Technical Notes
- The Camera Display and Control Panel
- The Nikon Creative Lighting System
- Other Accessories
- Caring for the Camera
- Caring for the Camera and Battery: Cautions
- Specifications
- NIKKOR Z 24–70mm f/4 S Lens User’s Manual
- FTZ Mount Adapter User’s Manual
- Approved Memory Cards
- Memory Card Capacity
- Battery Endurance
- Notices
- Bluetooth and Wi-Fi (Wireless LAN)
- Index
146 Menu List
e4 Auto c ISO sensitivity control (defaults to Subject and background)
Subject and background Choose whether auto ISO sensitivity
control for flash photography is
adjusted to correctly expose both the
subject and background or the main
subject only.
Subject only
e5 Modeling flash (defaults to On)
On Choose On to preview lighting effects
when using optional flash units
compatible with the Nikon Creative
Lighting System.
Off
e6 Auto bracketing (mode M) (defaults to Flash/speed)
Flash/speed Choose the settings affected when
exposure and/or flash bracketing is
enabled in mode M.
Flash/speed/aperture
Flash/aperture
Flash only
e7 Bracketing order (defaults to MTR > under > over)
MTR > under > over Choose the bracketing order for
exposure, flash, and white balance
bracketing.
Under > MTR > over
D Fixing Shutter Speed at the Flash Sync Speed Limit
To fix shutter speed at the sync speed limit in mode S or M, choose a
speed one setting slower than the slowest speed possible (30s or
Time). A flash sync indicator (“X”) will appear in the display and control
panel together with the flash sync speed.
D Auto FP High-Speed Sync
Auto FP high-speed sync allows the flash to be used at the highest
shutter speed supported by the camera, making it possible to choose
the maximum aperture for reduced depth of field even in bright
sunlight. The flash information display shows “FP” when 1/200 s
(Auto FP) is selected.