Reference Manual

196 Menu Guide > C The Photo Shooting Menu
D Exposure and Flash Bracketing
In continuous release modes, shooting will pause after the number of
shots specified in the bracketing program have been taken. Shooting
will resume the next time the shutter-release button is pressed.
If the memory card fills before all shots in the sequence have been
taken, shooting can be resumed from the next shot in the sequence
after the memory card has been replaced or shots have been deleted
to make room on the memory card. If the camera is turned off before
all shots in the sequence have been taken, bracketing will resume from
the next shot in the sequence when the camera is turned on.
D Exposure Bracketing
The camera modifies exposure by varying shutter speed and aperture
(mode P), aperture (mode S), or shutter speed (modes A and M). If On is
selected for ISO sensitivity settings> Auto ISO sensitivity control in
modes P, S, and A, the camera will automatically vary ISO sensitivity for
optimum exposure when the limits of the camera exposure system are
exceeded; in mode M, the camera will first use auto ISO sensitivity
control to bring exposure as close as possible to the optimum and then
bracket this exposure by varying shutter speed. Custom Setting e6
(Auto bracketing (mode M)) can be used to change how the camera
performs exposure and flash bracketing in mode M: by varying flash
level together with shutter speed and/or aperture, or by varying flash
level alone.