Reference Manual

257Menu Guide > A Custom Settings
Choose the options that can be selected
by rotating the sub-command dial when
AF-area mode is assigned to the i menu
or a camera control. Highlight the
desired modes and press 2 to select or
deselect. Press J to save changes when
settings are complete.
Choose whether focus-point selection “wraps around” from one
edge of the display to another. If Wrap is selected, focus-point
selection will “wrap around” from top to bottom, bottom to top,
right to left, and left to right, so that, for example, pressing the
sub-selector right when a focus point at the right edge of the
display is highlighted selects the corresponding focus point at
the left edge of the display.
Choose from the following focus point display options:
• Manual focus mode: Choose On to display the active focus point in
manual focus mode, Off to display the focus point only during
focus point selection.
• Dynamic-area AF assist: If On is selected, both the selected focus
point and the surrounding focus points will be displayed in
dynamic-area AF mode. Choose Off to display only the
selected focus point.
a8: Limit AF-Area Mode Selection
G button ➜ A (Custom Settings menu)
a9: Focus Point Wrap-Around
G button ➜ A (Custom Settings menu)
a10: Focus Point Options
G button ➜ A (Custom Settings menu)