Reference Manual

280 Menu Guide > A Custom Settings
$
Shutter spd &
aperture lock
Press the control and rotate the main command
dial to lock shutter speed in modes S and M; press
the control and rotate the sub-command dial to
lock aperture in modes A and M.
W
Peaking
highlights
Press the control and rotate the main command
dial to choose a peaking level and the sub-
command dial to select the peaking color.
c
Rating
Press the control and rotate the main command
dial to rate the current picture during playback.
w
Choose non-
CPU lens
number
Press the control and rotate a command dial to
choose a lens number saved using the Non-CPU
lens data option in the setup menu.
Y
Same as multi
selector
Pressing the sub-selector up, down, left, and right
during shooting or playback has the same effect as
pressing 1, 3, 4, and 2 on the multi selector. To
choose the role played by sub-selector during
zoom, highlight Same as multi selector and press
2. Choose from Scroll (scroll the display) and
Display next/previous frame (view other photos
at the same zoom ratio).
x
Focus point
selection
Use the control to select the focus point. Using the
control during playback ends playback and
enables focus-point selection.
X
Focus (M/A)
Autofocus can be over-ridden by rotating the
control ring while the shutter-release button is
pressed halfway (autofocus with manual override).
To refocus using autofocus, lift your finger from
the shutter-release button and then press it
halfway again.
q
Aperture Use the control to adjust aperture.
E
Exposure
compensation
Use the control to adjust exposure compensation.
9
ISO sensitivity Use the control to adjust ISO sensitivity.
None The control has no effect.
Option Description