Reference Manual

287Menu Guide > A Custom Settings
Selecting Ye s allows adjustments that are normally made by
holding a button and rotating a command dial to be made by
rotating the command dial after the button is released. This ends
when the button is pressed again, the shutter-release button is
pressed halfway, or the standby timer expires. This setting
applies to the E, S, and c (E) buttons and also to controls to
which the following roles have been assigned using Custom
Settings f2 or g2 (Custom control assignment): Choose image
area, Image quality/size, White balance, Set Picture Control,
Active D-Lighting, Metering, Flash mode/compensation,
Focus mode/AF-area mode, Auto bracketing, Multiple
exposure, HDR (high dynamic range), Exposure delay mode,
Shutter spd & aperture lock, Peaking highlights, Choose
non-CPU lens number, and Microphone sensitivity.
If (W) is selected, the exposure indicator is
displayed with negative values on the left and positive values
on the right. Select (V) to display positive
values on the left and negative values on the right.
f6: Release Button to Use Dial
G button ➜ A (Custom Settings menu)
f7: Reverse Indicators
G button ➜ A (Custom Settings menu)