User's Manual
Table Of Contents
- Package Contents
- Table of Contents
- For Your Safety
- Notices
- Getting to Know the Camera
- First Steps
- Basic Photography and Playback
- Basic Settings
- Shooting Controls
- The i Menu
- Menu List
- Troubleshooting
- Technical Notes
- The Camera Display and Control Panel
- The Nikon Creative Lighting System
- Other Accessories
- Caring for the Camera
- Caring for the Camera and Battery: Cautions
- Specifications
- NIKKOR Z 24–70mm f/4 S Lens User’s Manual
- FTZ Mount Adapter User’s Manual
- Approved Memory Cards
- Memory Card Capacity
- Battery Endurance
- Bluetooth and Wi-Fi (Wireless LAN)
- Index
223Technical Notes ➜ NIKKOR Z 24–70mm f/4 S Lens User’s Manual
❚❚ Attaching and Removing the Lens Hood
Align the lens hood mounting mark (I) with the lens hood
alignment mark (I) and then rotate the hood (w) until the I
mark is aligned with the lens hood lock mark (K).
To remove the hood, reverse the above steps.
When attaching or removing the hood, hold it near the I
symbol on its base and avoid gripping it too tightly. The hood
can be reversed and mounted on the lens when not in use.
❚❚ When the Lens Is Attached
The focus position may change if you turn the camera off and
then on again after focusing. Refocus before shooting. If you
have focused on a pre-selected location while waiting for your
subject to appear, we recommend that you do not turn the
camera off until the picture is taken.