User's Manual

187Technical Notes
Mount
adapters
FTZ Mount Adapter (0 228)
Remote cords MC-DC2 Remote Cord (length 1m/3ft 4in.): When connected
to the camera accessory terminal, the MC-DC2 can be
used to release the shutter remotely.
GPS units GP-1/GP-1A GPS Unit: When connected to the camera
accessory terminal, existing GP-1/GP-1A units can be
used to record the current latitude, longitude, altitude,
and UTC (Universal Coordinated Time) with pictures
taken with the camera. Note that production of GP-1/
GP-1A units has ended.
USB cables • UC-E24 USB cable: A USB cable with a type C connector for
connection to the camera and a type A connector for
connection to the USB device.
• UC-E25 USB cable: A USB cable with two type C connectors.
HDMI cables HC-E1 HDMI Cable: An HDMI cable with a type C connector
for connection to the camera and a type A connector for
connection to HDMI devices.
Hot shoe
adapters
AS-15 Sync Terminal Adapter: Mount the AS-15 on the camera
hot shoe to connect studio strobe lights or other flash
equipment via a sync terminal.
Accessory shoe
covers
BS-1 Accessory Shoe Cover: A cover protecting the accessory
shoe when no flash unit is attached.
Body caps BF-N1 Body Cap: The body cap prevents dust entering the
camera when a lens is not in place.
Wireless
transmitters
WT-7 Wireless Transmitter: Use the WT-7 to upload pictures
over a wireless network, to control the camera from a
computer running Camera Control Pro 2 (available
separately), or to take and browse pictures remotely from
a computer or smart device.
Note: A wireless network and some basic network knowledge is required
when using a wireless transmitter. Be sure to update the wireless transmitter
software to the latest version.