Supplementary Firmware Update Manual

2
New Options for Custom Setting f2 “Custom
Controls (Shooting)”: “Save Focus Position” and
“Recall Focus Position”
Save focus position and Recall focus position have been
added to the roles that can be assigned to camera controls using
Custom Setting f2 (Custom controls (shooting)). You can save
the current focus position by assigning Save focus position to
Lens Fn button and then pressing and holding the lens Fn
button. The saved position can be instantly restored by
assigning Recall focus position to Lens Fn2 button and
pressing the lens Fn2 button (“memory recall”). You may find this
useful if you frequently return to subjects at a fixed focus
distance.
• Memory recall is available only when an autofocus Z mount
lens equipped with Fn and Fn2 buttons is mounted on the
camera. If the lens is not equipped with an Fn2 button, the
camera cannot save the focus position even if the Save focus
position is assigned to the lens Fn button.
• Focus positions can be saved and recalled in both photo and
movie modes.
• Focus positions can be saved in any focus mode.
• The stored focus position is reset when the lens is detached.
Features Available with “C” Firmware
Version 2.30