Supplementary Firmware Update Manual

ManualsBrandsNikon ManualsZ SeriesZ 50

SB3A03(11)

6MOA9911-03

En Added Functions

The Z 50 Reference Manual is for “C” rmware version 2.20. This supple-

ment details the new features and changes introduced with camera

“C” rmware versions 2.30 and 2.40. The two documents are to be read

together.

Updating Camera Firmware

To view the camera rmware version or update the camera rmware,

select Firmware version in the setup menu. The latest rmware for the

Z50 is available for download from the Nikon Download Center.

https://downloadcenter.nikonimglib.com/

Summary of content (5 pages)

PAGE 1
SB3A03(11) 6MOA9911-03 En Added Functions The Z 50 Reference Manual is for “C” firmware version 2.20. This supplement details the new features and changes introduced with camera “C” firmware versions 2.30 and 2.40. The two documents are to be read together. Updating Camera Firmware To view the camera firmware version or update the camera firmware, select Firmware version in the setup menu. The latest firmware for the Z 50 is available for download from the Nikon Download Center. https://downloadcenter.
PAGE 2
Features Available with “C” Firmware Version 2.30 New Options for Custom Setting f2 “Custom Controls (Shooting)”: “Save Focus Position” and “Recall Focus Position” Save focus position and Recall focus position have been added to the roles that can be assigned to camera controls using Custom Setting f2 (Custom controls (shooting)). You can save the current focus position by assigning Save focus position to Lens Fn button and then pressing and holding the lens Fn button.
PAGE 3
Memory Recall 1 Select Save focus position for Custom Setting f2 (Custom controls (Shooting)) > Lens Fn button. 2 Select Recall focus position for Custom Setting f2 (Custom controls (Shooting)) > Lens Fn2 button. 3 Focus on the desired subject in the shooting display and press and hold the lens Fn button. If the operation is successful, an icon will appear in the shooting display to indicate that the focus position has been saved. 4 Press the lens Fn2 button.
PAGE 4
D Cautions: Memory Recall • Focus positions cannot be saved while shooting information is displayed. • Changes in ambient temperature may result in focus being recalled to a position different from that at which it was saved. • Previously-saved focus positions tend to change if recalled after lens focal length is adjusted via zoom.
PAGE 5
Features Available with “C” Firmware Version 2.40 Support for Eye-Detection AF in Movie Mode Updating to “C” firmware version 2.40 allows the use of eye-detection AF (a feature that detects and focuses on the eyes of humans, dogs, and cats) in movie mode, a mode in which it was not supported in earlier versions (“C” firmware versions 2.30 and earlier). “C” firmware versions 2.30 and earlier “C” firmware version 2.