Reference Manual

725
NIKKOR Z 24–200mm f/4–6.3 VR Lens Manual
Lens Care
•
Removing dust is normally sufficient to clean the glass
surfaces of the lens.
•
The fluorine-coated front lens element can be cleaned as
described below.
- Smudges, fingerprints, and other oily stains can be removed
using a soft, clean cotton cloth or lens cleaning tissue; clean
from the center outwards using a circular motion.
- To remove stubborn stains, wipe gently using a soft cloth
lightly dampened with a small amount of distilled water,
ethanol, or lens cleaner.
- Any drop-shaped marks left from this process on the water-
and oil-repellent surface can subsequently be removed with
a dry cloth.
•
When cleaning the rear lens element, which is not fluorine-
coated, remove smudges, fingerprints, and other oily stains
using a soft, clean cotton cloth or lens cleaning tissue lightly
dampened with a small amount of ethanol or lens cleaner.
Wipe gently from the center outwards in a circular motion,
taking care not to leave smears or touch the lens with your
fingers.
•
Never use organic solvents such as paint thinner or benzene to
clean the lens.
•
Neutral Color (NC) filters (available separately) and the like can
be used to protect the front lens element.
•
If the lens will not be used for an extended period, store it in a
cool, dry location to prevent mold and rust. Do not store in
direct sunlight or with naphtha or camphor moth balls.