Supplementary Firmware Update Manual

4
❚❚
Memory Recall
1
Select [Save focus position] for
Custom Setting f2 [Custom
controls] > [Lens Fn button].
2
Select [Recall focus position]
for Custom Setting f2 [Custom
controls] > [Lens Fn2 button].
3
Focus on the desired subject in
the shooting display and press
and hold the lens Fn button.
If the operation is successful, an icon
will appear in the shooting display to
indicate that the focus position has been saved.
4
Press the lens Fn2 button.
•
The saved focus position will be
restored.
•
Holding the lens Fn2 button
activates manual focus, and the
camera will not refocus if the shutter-release button is
pressed halfway while the control is pressed.