Supplementary Firmware Update Manual

12
A
The Remote Control Status LED (Z 5)
A
Adjusting Focus from the Camera
If [Focus] is selected for Custom Setting a2 [AF-S priority selection] in
focus mode AF-S, focus will lock when the camera shutter-release button
is pressed halfway. You can then press the shutter-release button on the
remote control to take a picture at the selected focus position.
A
The Standby Timer
To reactivate the camera after the standby timer has expired and the
monitor and viewfinder have both turned off, turn the remote control on
and press and hold its shutter-release or movie-record button.
Color Behavior Status
Green
Flashes approximately once a
second
Searching for paired
camera.
Green
Flashes quickly (approximately
twice a second)
Pairing.
Green
Flashes approximately once
every three seconds
Connected to camera.
Orange Flashes once Photography started.
Orange Flashes twice
“Bulb” or “Time”
photography ended.
Red Flashes once Movie recording started.
Red Flashes twice Movie recording ended.