Reference Guide (PDF Edition)

Charging the battery
67
D Notes when charging using the supplied USB cable
･ I
f the battery cannot be charged using the supplied USB cable to connect
the camera and computer, for example because the battery is not
compatible or the temperature of the camera is elevated, the charge lamp
will ash rapidly for about 30 seconds and then turn o. If the charge
lamp is o and you did not observe the battery charging, turn the camera
on and check the battery level.
･ When charging, do not use the connectors of a USB hub or keyboard.
Connect the camera and computer directly.
･ If the computer goes into hibernation (sleep mode) while charging, the
camera stops charging. To continue charging, wake up the computer from
hibernation (sleep mode).
･ Depending on the model and product specications, some computers
will not supply current to charge the camera.
A Using the supplied USB cable or a separately sold UC-E25
USB c
able to supply power
･ If [Enable] is selected for [USB power delivery] in the setup menu, the
camera will be supplied with power when it is turned on. For more
information, see ““Power delivery” versus “charging”” (0411).
･ The battery will not charge while the camera is powered by an outside
source.
･ If you use the supplied USB cable to supply power from a computer, the
camera battery will be consumed even while power is being supplied. If
you use the separately sold UC-E25 USB cable, the camera battery will not
be consumed (the camera battery may be consumed depending on your
computer model and specications).
A Charging or supplying power from a household outlet
When charging or supplying power from a household outlet, use the
separately sold EH-7P Charging AC Adapter (0557).