Reference Guide (PDF Edition)
Table Of Contents
- When your first photo can’t wait
- Package contents
- About this document
- Table of contents
- For your safety
- Notices
- Getting to know the camera
- First steps
- Basic photography and playback
- Basic settings
- Shooting controls
- The i menu
- Playback
- Menu guide
- Defaults
- The playback menu: Managing images
- The photo shooting menu: Shooting options
- Reset photo shooting menu
- Storage folder
- File naming
- Choose image area
- Image quality
- Image size
- RAW recording
- ISO sensitivity settings
- White balance
- Set Picture Control
- Manage Picture Control
- Color space
- Active D-Lighting
- Long exposure NR
- High ISO NR
- Vignette control
- Diffraction compensation
- Auto distortion control
- Flicker reduction shooting
- Metering
- Flash control
- Flash mode
- Flash compensation
- Release mode
- Focus mode
- AF-area mode
- Vibration reduction
- Auto bracketing
- Multiple exposure
- HDR (high dynamic range)
- Interval timer shooting
- Time-lapse video
- Focus shift shooting
- Silent photography
- The video recording menu: Video recording options
- Reset video recording menu
- File naming
- Frame size/frame rate
- Video quality
- Video file type
- ISO sensitivity settings
- White balance
- Set Picture Control
- Manage Picture Control
- Active D-Lighting
- High ISO NR
- Vignette control
- Diffraction compensation
- Auto distortion control
- Flicker reduction
- Metering
- Release mode (save frame)
- Focus mode
- AF-area mode
- Vibration reduction
- Electronic VR
- Microphone sensitivity
- Attenuator
- Frequency response
- Wind noise reduction
- Timecode
- Custom Settings: Fine-tuning camera settings
- Reset custom settings
- a: Autofocus
- b: Metering/exposure
- c: Timers/AE lock
- d: Shooting/display
- e: Bracketing/flash
- f: Controls
- g: Video
- The setup menu: Camera setup
- Format memory card
- Save user settings
- Reset user settings
- Language
- Time zone and date
- Monitor brightness
- Monitor color balance
- REC lamp brightness
- Information display
- AF fine-tuning options
- Non-CPU lens data
- Save focus position
- Image Dust Off ref photo
- Pixel mapping
- Image comment
- Copyright information
- Beep options
- Touch controls
- Self-portrait mode
- HDMI
- Airplane mode
- Connect to smart device
- Connect to computer
- Wireless remote (ML-L7) options
- Conformity marking
- USB power delivery
- Energy saving (photo mode)
- Slot empty release lock
- Save/load menu settings
- Reset all settings
- Firmware version
- The retouch menu: Creating retouched copies
- My Menu/Recent settings
- Establishing wireless connections to computers or smart devices
- Cabled connections to computers and HDMI devices
- On-camera flash photography
- Remote flash photography
- Troubleshooting
- Technical notes
- Compatible lenses and accessories
- Display in the monitor
- Compatible flash units
- Other compatible accessories
- Software
- Caring for the camera
- Caring for the camera and battery: Cautions
- Specifications
- Approved memory cards
- Portable chargers (power banks)
- Memory card capacity
- Available recording time
- Battery endurance
- Trademarks and licenses
- Notices
- Bluetooth and Wi-Fi (wireless LAN)
- Index
A
Custom Settings: Fine-tuning camera settings
355
D Auto FP high-speed sync
・ A
uto FP high-speed sync allows the ash to be used at the highest shutter
speed supported by the camera. When [1/200 s (Auto FP)] is selected, the
camera automatically enables auto FP high-speed sync at shutter speeds
faster than the ash sync speed. This makes it possible to choose the
maximum aperture for reduced depth of eld even when the subject is
backlit in bright sunlight.
e2: Flash shutter speed
G
button U
A
Custom Settings menu
Choose the slowest shutter speed available with a ash in mode P or A.
R
egardless of the setting chosen for Custom Setting e2 [Flash shutter
speed], shutter speeds can be as slow as 30 s in modes S and M or at
ash settings of slow sync, slow rear-curtain sync, or red-eye reduction
with slow sync.
e3: Exposure comp. for ash
G
button U
A
Custom Settings menu
Choose how the camera adjusts ash lev
el when exposure
compensation is used.
Option Description
Y
E
[En
tire frame]
The camera adjusts both the ash level and
exposure. This changes the exposure for the
entire frame.
E
[Background only]
Exposure compensation is adjusted for the
background only.










