Operation Manual

7
4
Load Settings into the Camera
1
After turning the camera off , insert the memory card containing the settings fi le
and connect the wireless transmitter.
2
Turn the camera on and select Wireless LAN > Network settings > Load settings
fi le? (WT-1) or Wireless LAN > Settings > Network settings > Load settings fi le?
(WT-2) in the camera setup menu.
If the memory card contains no settings fi le or the settings fi le is not in the root
directory, the camera will not detect the settings fi le and the Load settings fi le?
option will not be available. Check that the settings fi le is in the root directory of
the memory card.
3
The dialog shown below will be displayed. Select Yes to load settings.
Confi rm that the settings are correct using the Wireless, TCP / IP, and FTP options
in the Network settings menu.