Brugervejledning(iOS)

11
A
Tap the shutter icon.
The shutter will be released after you re-
move your nger from the icon; the re-
sulting photo is rst saved to the camera
memory card and then downloaded to the
iOS device. There is no need to point the
iOS device at the camera.
3
D Remote Photography
Remote photography ends automatically when the battery in the
camera or iOS device runs low. Note that using remote photogra-
phy for an extended period may cause the camera’s internal tem-
perature to rise; if necessary, remote photography will end auto-
matically to minimize damage to camera circuits.
The iOS device can not be used to adjust camera settings; use cam-
era controls to adjust settings before starting Step 1. Regardless of
the release mode selected with the camera, only one picture will
be taken each time you tap the shutter icon. Note that the display
may not update smoothly depending on the device and network
conditions, and that panoramas can not be recorded using the
easy panorama feature for the D3300.
A shutter speed of “Time” is available in mode M. Choose a shutter
speed of A on the camera and select Shoot> WMU on the
iOS device (page 12), then tap the shutter icon to open the shutter.
Shooting ends when the icon is tapped again. Note that the iOS
device will not display the view through the camera lens at a shutter
speed of “Bulb”, and that the iOS device can not be used in shooting
mode when “Time” is selected.