Operation Manual

Reference: The Tool Chest

Perform autofocus when film is inserted

This check box is available only when the MA-20 (S) slide-mount

adapter is inserted in a 4000 ED or COOLSCAN IV ED film

scanner. When this option is checked, an autofocus operation

will be automatically be performed when a slide is inserted in

the adapter film slot.

Trip Film Offset

This option is available when a strip-film adapter (SA-21/SA-20

or SA-30) is inserted in the scanner, when it allows you to ad-

just the position of the film. To use this option, the thumbnail

drawer must be open with thumbnails displayed. Select the de-

sired thumbnail and adjust its position using the Boundary Off-

set slider or by entering a value in the text box to its right

(inthe case of the 4000 ED and COOLSCAN IV ED, the maxi-

mum and minimum values are 0 and 144 respectively for the

first frame and –144 and 144 for all subsequent frames, while in

the case of the LS-2000 and COOLSCAN III, the offset ranges

from –127 to 127 for all frames). If the bottom of the thumbnail

is cut off, move the slider to the right to bring it into position; if

the top is cut off, move the slider to the left (note that the

direction of adjustment changes when the thumbnails are flipped

or rotated). Click the Reload Thumbnails button to view the

effects of any adjustments in the thumbnail drawer.