Operation Manual

16
Getting Started: Installation
Memory requirements for the Macintosh
Memory requirements vary with the adapter used. The follow-
ing minimum allocations are recommended:
Adapter Preferred Size
*
MA-20 (S) 65,536 K (64 MB)
SA-21/SA-20 65,536 K (64 MB)
IA-20 (S) 131,072 K (128 MB)
SA-30 131,072 K (128 MB)
* A minimum allocation of 128 MB is recommended when using Digital ROC
or Digital GEM.
Windows
Step 11—Check that the Nikon Scan CD is in place
If you will be connecting your scanner for the first time, before
you will be able to use the device you will need to register it
with the Windows Device Manager. Before proceeding to the
next step, make sure the Nikon Scan 3 CD is inserted in the
CD-ROM drive, and then click here to proceed to the next
step.
If you have already registered your scanner with Windows, ei-
ther because you are re-installing Nikon Scan or are a user of a
LS-2000 or COOLSCAN III film scanner who is upgrading to
Nikon Scan 3, installation is complete. Click here to view
the next chapter.
Macintosh
Step 11—Check the memory available to Nikon Scan
Locate the Nikon Scan 3.0 icon in
the location you chose in Step 6. Af-
ter clicking the icon once to select it,
choose Get Info ( I) from the Finder
File menu. Select Memory from the
Show pop-up menu in the information
dialog to display memory requirements
as shown at right. If possible, enter a
value for “Preferred size” greater than
or equal to the suggested size.
Click here to proceed to the next step.