DIGITAL CAMERA Reference Manual En
Introduction Table of Contents ii xvii Parts of the Camera 1 Preparing for Shooting 7 Basic Shooting and Playback Operations 13 Shooting Features 22 Functions That Can Be Set with the d (Menu) Button 47 Using Location Data Functions/Displaying Maps 55 Using the Wi-Fi (Wireless LAN) Function 56 Connecting the Camera to a TV, Printer, or Computer 57 Reference Section E1 Technical Notes and Index F1 i
Introduction Read This First Introduction To get the most from this Nikon product, be sure to read “For Your Safety” (Avii-ix), “ Notes About Location Data Functions (GPS/GLONASS, Electronic Compass)” (Axii), and “Wi-Fi (Wireless LAN Network)” (Axiv), and all other instructions thoroughly and keep them where they will be read by all who use the camera. • If you want to start using the camera right away, see “Preparing for Shooting” (A7) and “Basic Shooting and Playback Operations” (A13).
How to Attach the Camera Strap Introduction • The camera strap can be attached to the eyelet on either side (left and right) of the camera body.
Information and Precautions Life-Long Learning Introduction As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually updated information is available online at the following websites: • For users in the U.S.A.: http://www.nikonusa.com/ • For users in Europe and Africa: http://www.europe-nikon.com/support/ • For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.
About the Manuals Introduction • No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission. • Illustrations and monitor content shown in this manual may differ from the actual product. • Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice.
Disposing of Data Storage Devices Introduction Please note that deleting images or formatting data storage devices such as memory cards or built-in camera memory does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s responsibility.
For Your Safety This icon marks warnings, information that should be read before using this Nikon product, to prevent possible injury. Introduction To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
Do not leave the product where it will be exposed to extremely high temperatures, such as in an enclosed automobile or in direct sunlight Failure to observe this precaution could cause damage or fire. Introduction Observe caution when handling the battery The battery may leak, overheat, or explode if improperly handled. Observe the following precautions when handling the battery for use in this product: • Before replacing the battery, turn the product off.
• Do not handle the plug or Charging AC Adapter with wet hands. Failure to observe this precaution could result in electric shock. • Do not use with travel converters or adapters designed to convert from one voltage to another or with DC-to-AC inverters. Failure to observe this precaution could damage the product or cause overheating or fire.
Notices Notices for Customers in the U.S.A. Introduction IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS. DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet if needed. The power supply unit is intended to be correctly orientated in a vertical or floor mount position.
Notice for Customers in the State of California Notice for Customers in Canada Introduction WARNING Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel: 631-547-4200 CAN ICES-3 B / NMB-3 B Notices for Customers in Europe CAUTIONS RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Notes About Location Data Functions (GPS/GLONASS, Electronic Compass) Introduction bMap/location name data of this camera Before using the location data functions, make sure to read “USER LICENSE AGREEMENT FOR MAP DATA AND LOCATION NAME DATA” (F21) and agree to the terms. • The maps and location name information (Points of Interest: POI) are as of April 2014. The maps and location name information will not be updated.
bUsing the camera overseas • Before taking the camera with location data functions overseas for travel, consult your travel agency or embassy of the country you are visiting to confirm whether there is any restriction on use. For example, you cannot record location data logs without permission from the government in China. Set Record location data to Off. • The location data may not function properly in China and on the borders between China and neighboring countries (as of December 2014).
Wi-Fi (Wireless LAN Network) Introduction This product is controlled by the United States Export Administration Regulations, and you are required to obtain permission from the United States government if you export or re-export this product to any country to which the United States embargoes goods. The following countries were subject to embargo: Cuba, Iran, North Korea, Sudan, and Syria.
COOLPIX S9900, which is equipped with a DW092 (FCC ID:EW4DW092 / IC ID:4634A-3149EC) Wireless LAN Module, has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. Please refer to the SAR test report that was uploaded to FCC website.
Precautions when Using Radio Transmissions Always keep in mind that radio transmission or reception of data is subject to interception by third parties. Note that Nikon is not responsible for data or information leaks that may occur during data transfer.
Table of Contents Introduction ................................................................................................................ ii Table of Contents Read This First ............................................................................................................................ ii Other Information........................................................................................................................................ ii How to Attach the Camera Strap..............
Shooting Features................................................................................................... 22 Table of Contents A (Auto) Mode ...................................................................................................................... 22 Scene Mode (Shooting Suited to Scenes)...................................................................... 23 Smart Portrait Mode (Enhancing Human Faces When Shooting)......................... 25 Using Smile Timer.....................
Reference Section .............................................................................................. E1 Table of Contents Tips and Notes on the Scene Mode ............................................................................ E3 Shooting Time-lapse Movies ....................................................................................................... E9 Shooting with Easy Panorama.................................................................................................
Table of Contents xx Editing Movies ................................................................................................................. E48 Extracting Only the Desired Portion of a Movie............................................................ E48 Saving a Frame from a Movie as a Still Image................................................................ E49 Connecting to a Smart Device (Wi-Fi) .....................................................................
Table of Contents Copy (Copy Between the Memory Card and Internal Memory)......................... E85 Sequence Display Options......................................................................................................... E86 The Location Data Options Menu............................................................................. E87 Location Data Options ................................................................................................................. E87 Distance Units .......
Technical Notes and Index............................................................................... F1 Table of Contents xxii Caring for the Product ...................................................................................................... F2 The Camera............................................................................................................................................... F2 The Battery ................................................................................
Parts of the Camera The Camera Body 1 2 3 4 5 6 7 1 Flash raised 16 8 Lens cover closed 14 Parts of the Camera 15 13 12 11 10 9 1 Eyelet for camera strap........................iii 2 Command dial......................................31 3 Power switch/power-on lamp ........................................................................11 4 Shutter-release button....................14 5 Mode dial......................................... 13, 20 6 Self-timer lamp........................
1 2 3 4 5 6 7 8 9 16 15 Parts of the Camera 14 10 11 13 12 1 K (flash pop-up) control ................................................................ 16, 35 2 Charge lamp.............................................8 Flash lamp...............................................16 3 b (e movie-record) button ....................................................... 20, E43 4 c (playback) button.......................18 5 Z (Wi-Fi) button...............
The Monitor The information that is displayed in the monitor during shooting and playback changes depending on the camera’s settings and state of use. By default, information is displayed when the camera is first turned on and when you operate the camera, and turns off after a few seconds (when Photo info is set to Auto info in Monitor settings (A54)). Shooting Mode 6 7 3 1 23 5 4 8 AF 9 10 10 11 22 12 21 20 19 1 2 3 4 5 6 7 8 9 10 11 12 13 Parts of the Camera 2 400 1/250 F3.
44 43 42 HDR 45 46 47 48 2 49 10 41 H 40 L 120 38 37 10 50 39 51 33 36 35 60 PRE Parts of the Camera 400 34 29 28 30 F3.7 29m 0s 999 a b 24 25 26 32 31 27 24 ISO sensitivity ........................................49 25 Battery level indicator ......................13 Charging AC adapter connection 26 indicator 27 Date stamp.............................................54 28 Travel destination icon........... E95 29 “Date not set” indicator...............
Playback Mode 1 23 4 5 6 7 8 9 999 / 999 999 / 999 9999 / 9999 29m00s 29m00s 10 11 List by date icon ......................... E23 6 D-Lighting icon....................52, E27 Protect icon........................... 52, E84 7 Quick retouch icon............52, E27 Red-eye correction............52, E28 3 Sequence display (when Individual pictures is selected) ....................................................... 53, E86 8 9 Internal memory indicator............ 13 4 Glamour retouch icon ....
999 / 999 28 12 13 27 14 26 25 24 23 15 9999. JPG 15/11/2015 15:30 21 22 Parts of the Camera 20 18 17 19 12 Image quality ....................... 49, E60 21 Time of recording 13 Image size .............................. 49, E61 22 Date of recording 14 Easy panorama............................ E11 23 15 Movie options...................... 51, E75 16 Volume indicator ....................... E47 17 Small picture icon ............. 52, E30 18 Crop icon ........................
Preparing for Shooting Insert the Battery and Memory Card Battery latch Memory card slot B Formatting a Memory Card The first time you insert a memory card that has been used in another device into this camera, make sure to format it with this camera. Insert the card into the camera, press the d button, and select Format card in the setup menu (A54).
Charge the Battery 1 With the battery installed, connect the camera to an electrical outlet. Charging AC Adapter Electrical outlet Preparing for Shooting Charge lamp USB cable (included) If a plug adapter* is included with your camera, securely connect it to the Charging AC Adapter. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product. * The shape of the plug adapter varies according to the country or region in which the camera was purchased.
B Notes About the USB Cable • Do not use a USB cable other than the UC-E21. Using a USB cable other than the UC-E21 could result in overheating, fire or electric shock. • Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an angle when connecting or disconnecting them.
Opening and Adjusting the Angle of the Monitor Changing the orientation of the monitor is useful when shooting with the camera in a high or a low position, or when taking selfies. For normal shooting, fold the monitor against the camera body with the screen facing out (3). Preparing for Shooting When you are not using or carrying the camera, fold the monitor against the camera body with the screen facing inward to prevent scratches or contamination.
Turn the Camera On and Set the Display Language, Date, and Time When the camera is turned on for the first time, the language-selection screen and the date and time setting screen for the camera clock are displayed. 1 Press the power switch to turn on the camera. • The monitor turns on. • To turn the camera off, press the power switch again. • The power switch is enabled a few seconds after the battery is inserted. Wait a few seconds before pressing the power switch.
6 Set the date and time, and press the k button. • Use J K to select a field and then use HI to set the date and time. • Select the minute field and press the k button to confirm the setting. Date and time D M Y 15 11 2015 h m 15 30 Edit 7 When the confirmation dialog is displayed, use HI to select Yes and press the k button. • When settings are finished, the lens extends and the camera switches to shooting mode.
Basic Shooting and Playback Operations Shooting with A (Auto) Mode 1 Rotate the mode dial to A. 1/250 Battery level indicator 2 Hold the camera steady. • Keep fingers and other objects away from the lens, flash, AF-assist illuminator, microphones, and speaker. F3.7 25m 0s 880 Number of exposures remaining Basic Shooting and Playback Operations • The camera enters A (auto) mode and can be used for general shooting. • Battery level indicator b: The battery level is high.
3 Frame the picture. Zoom out Zoom in • Move the zoom control to change the zoom lens position (A17). 4 Basic Shooting and Playback Operations 14 Press the shutter-release button halfway. • When the subject is in focus, the focus area or focus indicator is displayed in green. • When you are using digital zoom, the camera focuses in the center of the frame and the focus area is not displayed. • If the focus area or focus indicator flashes, the camera is unable to focus.
B Notes About Saving Images or Movies The indicator showing the number of exposures remaining or the indicator showing remaining recording time flashes while images or movies are being saved. Do not open the battery-chamber/memory card slot cover or remove the battery or memory card while an indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the memory card.
Using the Flash In situations where a flash is needed, such as in dark locations or when the subject is backlit, move the K (flash pop-up) control to raise the flash. • When not using the flash, gently push to lower the flash until it clicks shut. Basic Shooting and Playback Operations 16 C The Flash Lamp • The status of the flash can be confirmed by pressing the shutter-release button halfway. - On: The flash fires when you press the shutter-release button all the way down.
Using the Zoom When you move the zoom control, the zoom Zoom out Zoom in lens position changes. • To zoom in: Move toward g • To zoom out and view a larger area: Move toward f When you turn the camera on, the zoom moves to the maximum wide-angle position. • A zoom indicator is displayed on the shooting screen when the zoom control is moved.
Play Back Images 1 Press the c (playback) button to enter playback mode. • If you press and hold down the c (playback) button while the camera is turned off, the camera turns on in playback mode. 2 Use the multi selector to select an image to display. Basic Shooting and Playback Operations • Press and hold down HIJK to scroll through the images quickly. • Images can also be selected by rotating the multi selector. • To play back a recorded movie, press the k button.
Delete Images 1 Press the l (delete) button to delete the image currently displayed in the monitor. 2 Use the multi selector HI to select the desired deletion method and press the k button. • To exit without deleting, press the d button. • When Erase selected images is selected, see “The Image Selection Screen”(A53). Erase selected images All images Select Yes and press the k button. • Deleted images cannot be recovered.
Changing the Shooting Mode Rotate the mode dial to select one of the following shooting modes. Basic Shooting and Playback Operations • A (Auto) mode Used for general shooting. • y (Scene) mode Camera settings are optimized according to the scene that you select. When using scene auto selector, the camera automatically recognizes the shooting scene when you frame a picture, making it easier to take pictures using settings that suit the scene.
Functions That Can Be Set with the Multi Selector (When Shooting) When the shooting screen is displayed, you can press the multi selector H(m) J (n) I(p) K (o) to set the functions described below. The functions that can be set vary depending on the shooting mode. Basic Shooting and Playback Operations • m Flash mode When the flash is raised, you can select a flash mode to match the shooting conditions.
Shooting Features A (Auto) Mode Used for general shooting. • When the camera detects a human face, it focuses on that face (face detection).
Scene Mode (Shooting Suited to Scenes) When a scene is selected, camera settings are automatically optimized for the selected scene. Scene auto selector Portrait Landscape Time-lapse movie Sports Night portrait Press the d (menu) button to display the scene menu and select a scene using the multi selector.
To View a Description (Help Display) of Each Scene Select a scene and move the zoom control (A1) toward g (j) to view a description of that scene. To return to the previous screen, move the zoom control toward g (j) again.
Smart Portrait Mode (Enhancing Human Faces When Shooting) You can take a picture with the glamour retouch function to enhance human faces. 1 Press the multi selector K. 2 Apply an effect. • Select f Exit to hide the slider. • After configuring the desired effects, press the k button to apply them. Slider Skin softening Effects 3 Frame the picture and press the shutter-release button. B Notes About Smart Portrait Mode Shooting Features • Use JK to select the desired effect.
Functions Available in Smart Portrait Mode • • • • • • Glamour retouch (A25) Smile timer (A26) Self-Collage (A27) Flash mode (A35) Self-timer (A37) Smart portrait menu (A50) Using Smile Timer When you press the multi selector J to select a Smile timer and press the k button, the camera automatically releases the shutter whenever a smiling face is detected. • Set the glamour retouch function before selecting smile timer (A25).
Using Self-Collage The camera can capture a series of 4 or 9 images at intervals and save them as a one-frame image (a collage image). 1/5 0004. JPG 15/11/2015 15:30 1 Press the multi selector J to select n Self-Collage, and press the k button. • A confirmation dialog is displayed. • When you press the d button and select Self-Collage before pressing J, you can configure the settings for Number of shots, Interval, and Shutter sound (A50).
Short Movie Show Mode (Combining Movie Clips to Create Short Movies) You can create a short movie (e1080/30p or S1080/25p) that is up to 30 seconds long by recording and automatically combining multiple movie clips that are several seconds long. 1 Press the d (menu) button and configure the settings for recording movies.
4 Save the short movie show. • The short movie show is saved when the camera finishes recording the specified number of movie clips. • To save a short movie show before the camera finishes recording the specified number of movie clips, press the d button on the shooting screen while a movie clip is not being recorded, and then select End recording. • Movie clips are deleted when a short movie show is saved.
C Pausing Movie Recording • A still image with Normal in image quality and j 4608×2592 in image size can be captured if you press the shutter-release button on the shooting screen while a movie is not being recorded. • You can pause movie recording and play back images or enter other shooting modes to take pictures. Movie recording resumes when you enter n (short movie show) mode again.
A, B, C, D Modes (Setting the Exposure for Shooting) Images can be shot with greater control by setting the shutter speed or aperture value manually. Settings can also be adjusted to suit the shooting conditions and the type of shot you want to capture. • You can change how the camera selects the area of the frame to focus on by changing the AF area mode setting (A50). When Target finding AF (default setting) is used, the camera detects the main subject and focuses on it.
Exposure The procedure for shooting images at the desired brightness (exposure) by adjusting the shutter speed or aperture value is called “determine exposure”. The sense of dynamism and amount of background defocus in images to be shot vary depending on the combinations of shutter speed and aperture value even if the exposure is the same. Adjusting the Shutter Speed Faster 1/1000 s Slower 1/30 s Adjusting the Aperture Value Shooting Features Larger aperture (Small f-number) f/3.
A (Programmed auto) Use for automatic control of the exposure by the camera. • Different combinations of shutter speed and aperture value can be selected without changing the exposure by rotating the 25m 0s 1/250 F3.7 880 command dial or multi selector (“flexible program”). While flexible program is in effect, a flexible program mark (A) is displayed next to the mode indicator (A) in the upper left of the monitor.
B Notes About Shooting • When zooming is performed after the exposure is set, exposure combinations or aperture value may be changed. • When the subject is too dark or too bright, it may not be possible to obtain the appropriate exposure. In such cases, the shutter speed indicator or aperture value indicator flashes (in A, B, and C modes), or the exposure indicator is displayed in red (in D mode) when the shutter-release button is pressed halfway. Change the shutter speed setting or aperture value.
Flash Mode When the flash is raised, you can set the flash mode to match the shooting conditions. 1 Move the K (flash pop-up) control to raise the flash. • When the flash is lowered, flash operation is disabled and S is displayed. Press the multi selector H (m). 3 Select the desired flash mode (A36) and press the k button. Auto Shooting Features 2 • If the setting is not applied by pressing the k button within a few seconds, the selection will be canceled.
Available Flash Modes U Auto The flash fires when necessary, such as in dim lighting. • The flash mode icon on the shooting screen is displayed only immediately after the setting is made. • Not available in shooting modes A, B, C, and D, and in some scene modes. V Auto with red-eye reduction/Red-eye reduction Reduce “red-eye” in portraits caused by the flash. • Red-eye reduction is used in shooting modes A, B, C, and D to fire the flash whenever a picture is taken.
Self-timer The camera is equipped with a self-timer that releases the shutter about 10 seconds or 2 seconds after you press the shutter-release button. Set Photo VR to Off in the setup menu (A54) when using a tripod to stabilize the camera during shooting. 1 Press the multi selector J (n). 2 Select n 10s or n 2s, and press the k button. Self-timer 3 Frame the picture and press the shutter-release button halfway. Shooting Features • n 10s (10 seconds): Use on important occasions, such as weddings.
4 Press the shutter-release button the rest of the way down. • Countdown starts. The self-timer lamp flashes and then glows steadily about one second before the shutter is released. • When the shutter is released, the self-timer is set to k. • To stop the countdown, press the shutter-release button again.
Macro Mode (Taking Close-up Pictures) Use macro mode when taking close-up pictures. 1 Press the multi selector I (p). 2 Select o and press the k button. Macro mode • If the setting is not applied by pressing the k button within a few seconds, the selection will be canceled. 3 • When the zoom ratio is set to a position where the zoom indicator is displayed in green, the camera can focus on subjects as close as approximately 10 cm (4 in.) from the lens.
Creative Slider (Adjusting Brightness (Exposure Compensation), Vividness, and Hue) When the shooting mode is set to A, B, C, or D mode, use the creative slider to adjust brightness (exposure compensation), vividness, and hue for capturing images. 1 Press the multi selector K (o). 2 Select the item and make an adjustment. Slider Brightness (Exp. +/-) Shooting Features • JK: Select an item.
Brightness (Exposure Compensation) Adjust the overall brightness of the image. • To brighten the image, set a positive (+) value. • To darken the image, set a negative (–) value. Slider Brightness (Exp. +/-) + 2.0 + 0.3 - 2.0 Histogram B Exposure compensation value Notes About Exposure Compensation Brightness adjustment (exposure compensation) cannot be used in D mode. C Using the Histogram Shooting Features A histogram is a graph showing the distribution of tones in the image.
Vividness (Saturation Adjustment) Adjust the overall vividness of the image. • The overall image vividness increases as the slider is moved up. The overall image vividness decreases as the slider is moved down. Slider Vividness Hue (White Balance Adjustment) Adjust the overall hue of the image. • The overall image becomes more reddish as the slider is moved up. The overall image becomes more bluish as the slider is moved down.
Exposure Compensation (Adjusting Brightness) When the shooting mode is set to A (auto) mode, scene mode, or short movie show mode, you can adjust the brightness (exposure compensation). 1 Press the multi selector K (o). 2 Select a compensation value and press the k button. • To brighten the image, set a positive (+) value. • To darken the image, set a negative (–) value. • The compensation value is applied, even without pressing the k button. + 2.0 + 0.3 - 2.
Functions That Cannot Be Used Simultaneously When Shooting Some functions cannot be used with other menu options. Restricted function Option Description Continuous (A49) When a setting other than Single is selected, the flash cannot be used. Blink proof (A50) When Blink proof is set to On, the flash cannot be used. Self-timer AF area mode (A50) When Subject tracking is selected, the self-timer cannot be used.
Restricted function Option Description If the self-timer is used when Preshooting cache is selected, the setting is fixed at Single. ISO sensitivity Continuous (A49) When Pre-shooting cache, Continuous H: 120 fps, or Continuous H: 60 fps is selected, the ISO sensitivity setting is automatically specified according to the brightness. AF area mode White balance (A49) When a setting other than Auto is selected for White balance in Target finding AF mode, the camera does not detect the main subject.
Restricted function Option Flash mode (A35) If the flash fires when On (hybrid) is selected, the setting is fixed at On. Self-timer (A37) If the self-timer is used when On (hybrid) is selected, the setting is fixed at On. Continuous (A49) If Continuous is set to any setting other than Single when On (hybrid) is selected, the setting is fixed at On. ISO sensitivity (A49) If ISO sensitivity is set to Fixed range auto or ISO 400 or higher when On (hybrid) is selected, the setting is fixed at On.
You can set the menus listed below by pressing the d (menu) button. • A, y, F, n, A, B, C, D Shooting menu Available by pressing the d button when the shooting screen is displayed. Allows you to change image size and quality, continuous shooting settings, etc. Menu icons and setting items vary depending on the shooting mode. • e Movie menu Available by pressing the d button when the shooting screen is displayed. Allows you to change movie recording settings.
2 Press the multi selector J. Functions That Can Be Set with the d (Menu) Button • The current menu icon is displayed in yellow. Shooting menu Image quality Image size Menu icons 3 Select a menu icon and press the k button. • The menu options become selectable. Set up Time zone and date Monitor settings Date stamp Photo VR AF assist Digital zoom 4 Select a menu option and press the k button. • Certain menu options cannot be set depending on the current shooting mode or the state of the camera.
The Shooting Menu Image quality Image size White balance Metering Continuous ISO sensitivity Common Options Description A Image quality Allows you to set the image quality (compression ratio) used when saving images. • Default setting: Normal E60 Image size Allows you to set the image size used when saving images.
Option Functions That Can Be Set with the d (Menu) Button 50 Description A AF area mode Allows you to determine how the camera selects the focus area that is used for autofocus. • Default setting: Target finding AF (E18) E69 Autofocus mode Allows you to set the method how the camera focuses. • Default setting: Pre-focus E72 M exposure preview Allows you to select whether or not changes in the brightness are also reflected on the shooting screen when the exposure is changed in D (manual) mode.
The Movie Menu Movie options AF area mode Autofocus mode Movie VR Wind noise reduction Frame rate Option Description A Movie options Select the movie type. Select normal speed to record movies at normal speed, or HS (high speed) to record movies that play in slow or fast motion. • Default setting: e 1080/30p or S 1080/ 25p E75 AF area mode Set the method how the camera selects the focus area for autofocus during movie recording.
The Playback Menu Functions That Can Be Set with the d (Menu) Button 52 Press the c button (playback mode) M d button Mark for Wi-Fi upload Quick retouch D-Lighting Red-eye correction Glamour retouch Slide show Option Description A Mark for Wi-Fi upload Allows you to select images in the camera that you want to transfer to a smart device in advance before transferring them. E82 Quick retouch* Allows you to create retouched copies in which contrast and saturation have been enhanced.
Option A E86 * Edited images are saved as separate files. Some images may not be edited. The Image Selection Screen When an image selection screen such as the one shown on the right is displayed while operating the camera, follow the procedures described below to select the images. Protect Back 1 Use the multi selector JK to select an image. • Move the zoom control (A1) toward g (i) to switch to full-frame playback or f (h) to switch to thumbnail playback.
The Setup Menu Functions That Can Be Set with the d (Menu) Button 54 Press the d button M z menu icon M k button Time zone and date Monitor settings Date stamp Photo VR AF assist Digital zoom Option Description A Time zone and date Allows you to set the camera clock. E95 Monitor settings Allows you to adjust photo information display, post-shooting image review, and monitor brightness settings. E97 Date stamp Allows you to imprint the shooting date and time on images.
Using Location Data Functions/ Displaying Maps Select the z (location data options) menu (A47), and set Record location data in Location data options to On, the camera starts receiving signals from positioning satellites. 1/250 F3.7 25m 0s 880 Recording the Shooting Location Data on the Image • When shooting while positioning is being performed, the obtained location data (latitude and longitude) are recorded on the images to be shot.
Using the Wi-Fi (Wireless LAN) Function You can perform the following functions if you install the dedicated software “Wireless Mobile Utility” on your smart device that runs on Android OS or iOS, and connect it to the camera. Take Photos You can capture still images using the two methods described below. • Release the shutter on the camera and save the captured images to a smart device. • Use a smart device to remotely release the camera shutter and save images to the smart device.
Connecting the Camera to a TV, Printer, or Computer You can enhance your enjoyment of images and movies by connecting the camera to a TV, printer, or computer. Micro-USB connector HDMI micro connector (Type D) Insert the plug straight. • Before connecting the camera to an external device, make sure the remaining battery level is sufficient and turn the camera off. Before disconnecting, make sure to turn the camera off.
Viewing images on a TV E53 Images and movies captured with the camera can be viewed on a TV. Connection method: Connect a commercially available HDMI cable to the TV’s HDMI input jack. Printing images without using a computer E54 If you connect the camera to a PictBridge-compatible printer, you can print images without using a computer. Connection method: Connect the camera directly to the printer’s USB port with the USB cable.
Reference Section The Reference Section provides detailed information and hints about using the camera. Shooting Tips and Notes on the Scene Mode.........................................................................E3 Default Settings (Flash, Self-timer, Etc.).............................................................. E14 Focusing.........................................................................................................................
Connection Connecting to a Smart Device (Wi-Fi) ................................................................. E50 Preselecting Images in the Camera That You Want to Transfer to a Smart Device ............................................................................................................................. E52 Connecting the Camera to a TV (Playback on a TV) ....................................... E53 Connecting the Camera to a Printer (Direct Print)..........................................
Tips and Notes on the Scene Mode y M x Scene auto selector • When you point the camera at the subject, the camera automatically recognizes the optimum scene mode from the list below and adjusts the shooting settings accordingly.
y M d Sports • While the shutter-release button is held all the way down, the camera shoots up to about 5 images continuously at a rate of about 7 fps (when image quality is set to Normal and when image size is set to i 4608×3456). • The frame rate for continuous shooting may become slow depending on the current image quality setting, image size setting, the memory card used, or shooting condition. • Focus, exposure, and hue are fixed at the values determined with the first image in each series.
y M j Night landscape • On the screen displayed when j Night landscape is selected, select u Handheld or w Tripod. • u Hand-held (default setting): - While the j icon on the shooting screen is displayed in green, press the shutter-release button all the way to capture a series of images which are combined into a single image and saved. - Once the shutter-release button is pressed all the way, hold the camera still until a still image is displayed.
y M m Fireworks show • The shutter speed is fixed at about four seconds. • The zoom is restricted to 10 fixed positions. y M o Backlighting • On the screen displayed when o Backlighting is selected, select On or Off of HDR (high dynamic range) composition based on the type of image you want to capture. • Off (default setting): The flash fires to prevent the subject from being hidden in shadow. - When the shutter-release button is pressed all the way down, one image is captured.
y M O Pet portrait • When you point the camera at a dog or cat, the camera detects the pet’s face and focuses on it. By default, the shutter is automatically released when the camera detects a dog or cat face (pet portrait auto release). • On the screen displayed when O Pet portrait is selected, select U Single or V Continuous. - U Single: Whenever the camera detects a dog or cat face, the camera captures 1 image.
y M R Special effects • On the screen displayed when R Special effects is selected, select the shooting effect. Type Description O Soft (default setting) Softens the image by adding a slight blur to the entire image. P Nostalgic sepia Adds a sepia tone and reduces the contrast to simulate the qualities of an old photograph. F High-contrast mono. Changes the image to black and white and gives it sharp contrast.
Shooting Time-lapse Movies The camera can automatically capture 300 still images at a specified interval to create time-lapse movies (e1080/30p) that are approximately 10 seconds long.
3 Stabilize the camera by using a tool such as a tripod. 4 Press the shutter-release button to capture the first image. AE-L 22m 5s • Set exposure compensation (A43) before releasing the shutter for the first image. Exposure compensation cannot be changed after the first image is captured. End recording Focus and hue are fixed when the first 1/250 F3.7 image is captured. • The shutter is automatically released for the second and subsequent images.
Shooting with Easy Panorama Rotate the mode dial to y M d button M p Easy panorama M k button 1 Select Normal or Wide as the shooting range and press the k button. • When the camera is readied in the horizontal position, the image size (width × height) is as follows.
4 Move the camera in one of the four directions until the guide indicator reaches the end. Guide • When the camera detects which direction it is moving in, shooting begins. • Shooting ends when the camera captures the specified shooting range. • Focus and exposure are locked until shooting ends. Example of Camera Movement • Using your body as the axis of rotation, move the camera slowly in an arc, in the direction of the marking (KLJI).
Playback with Easy Panorama Switch to playback mode (A18), display an image captured using easy panorama in fullframe playback mode, and then press the k button to scroll the image in the direction that was used when shooting. • Rotate the multi selector to scroll forward or backward quickly. 4/4 0004. JPG 15/11/2015 15:30 Playback controls are displayed at the bottom of the monitor during playback.
Default Settings (Flash, Self-timer, Etc.) Default settings for each shooting mode are listed below. Flash (A35) A (auto) Self-timer (A37) Macro (A39) Exposure compensation (A43) U k k 0.0 U1 k k2 0.0 0.0 y x (scene auto selector) b (portrait) V k k3 c (landscape) W3 k k3 0.0 N (time-lapse movie) W3 k k3 0.0 4 d (sports) W3 k3 k3 0.0 e (night portrait) V3 k k3 0.0 f (party/indoor) V5 k k3 0.0 Z (beach) U k k3 0.0 z (snow) U k k3 0.
1 Cannot be changed. The camera automatically selects the flash mode appropriate for the scene it has selected. Cannot be changed. The camera enters macro mode when i is selected. 3 Cannot be changed. 4 Cannot be changed when Night sky or Star trails is used. 5 May switch to slow sync with red-eye reduction flash mode. 6 Flash is fixed at X (fill flash) when HDR is set to Off, and is fixed at W (off) when HDR is set to On. 7 Self-timer cannot be used. Pet portrait auto release can be set to o or k (E7).
Focusing The focus area varies depending on the shooting mode. Using Face Detection In the following shooting modes, the camera uses face detection to automatically focus on human faces. • A (Auto) mode (A22) • Scene auto selector, Portrait, or Night portrait scene mode (A23) 25m 0s • Smart portrait mode (A25) 1/250 F3.
Using Skin Softening When the shutter is released while using one of the shooting modes listed below, the camera detects human faces and processes the image to soften facial skin tones (up to 3 faces). • Smart portrait mode (A25) - The skin softening level can be adjusted by the glamour retouch function. • Scene auto selector, Portrait, or Night portrait scene mode (A23) Editing functions such as Skin softening can be applied to saved images by using Glamour retouch (A52) even after shooting.
Using Target Finding AF When AF area mode (E69) in A, B, C, or D mode is set to Target finding AF, the camera focuses in the manner described below when you press the shutter-release button halfway. • The camera detects the main subject and focuses on it. When the subject is in focus, the focus area is displayed in green. If a human face is detected, the camera automatically sets focus priority on it. 1/250 F3.
Focus Lock Focus lock shooting is recommended when the camera does not activate the focus area that contains the desired subject. 1 In A, B, C, or D mode, set AF area mode to Center (E69). 2 Position the subject in the center of the frame and press the shutter-release button halfway. • The camera focuses on the subject and the focus area is displayed in green. • Exposure is also locked. 3 1/250 F3.7 1/250 F3.7 Without lifting your finger, recompose the picture.
The Control Range of the Shutter Speed (A, B, C, or D Modes) The control range of the shutter speed differs depending on the zoom position, aperture, or the ISO sensitivity setting. Additionally, the control range changes in the following continuous shooting settings.
Playback Zoom Moving the zoom control toward g (i playback zoom) in full-frame playback mode (A18) zooms in on the image. Displayed area guide 4/4 0004. JPG 15/11/2015 15:30 Full-frame Playback 3.0 Image is zoomed in. • You can change the magnification rate by moving the zoom control toward f (h) or g (i). The zoom can also be adjusted by rotating the command dial. • To view a different area of the image, press the multi selector HIJK.
Thumbnail Playback/Calendar Display Moving the zoom control toward f (h thumbnail playback) in full-frame playback mode (A18) displays images as thumbnails. 1 / 20 1 / 20 Mon Sun 1 2 2015 11 Tue Wed Thu 3 4 5 4 Fr i Sat 6 7 14 8 9 10 11 12 13 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 0004.
List by Date Mode Press the c button (playback mode) M d button M N menu icon M C List by date M k button Use the multi selector HI to select a date and then press the k button to play back the images captured on the selected date. • Functions in the playback menu (A52) can be used for the images in the selected shooting date (except Copy). • The following operations are available while the shooting date selection screen is displayed. - d button: The functions listed below are available.
Viewing and Deleting Images Captured Continuously (Sequence) Viewing Images in a Sequence Images captured continuously or with the self-collage function are saved as a sequence. The first image of a sequence is used as the key 1/5 picture to represent the sequence when displayed in full-frame playback mode or thumbnail playback mode. For the self-collage function, a collage image is used as the key picture. To display each image in the sequence 0004. JPG 15/11/2015 15:30 individually, press the k button.
Deleting Images in a Sequence When the l (delete) button is pressed for images in a sequence, the images that are deleted vary depending on how the sequences are displayed. • When the key picture is displayed: - Current image: - Erase selected images: - All images: All images in the displayed sequence are deleted. When a key picture is selected on the erase selected images screen (A53), all images in that sequence are deleted. All images on the memory card or in the internal memory are deleted.
Editing Images (Still Images) Before Editing Images You can easily edit images on this camera. Edited copies are saved as separate files. Edited copies are saved with the same shooting date and time as the original. C Restrictions on Image Editing • An image can be edited up to 10 times. Additionally, still images created by movie editing can be edited up to 9 times. • You may not be able to edit images of a certain size or with certain editing functions.
Quick Retouch: Enhancing Contrast and Saturation Press the c button (playback mode) M select an image M d button M Quick retouch M k button Use the multi selector HI to select the amount of effect applied and press the k button. Quick retouch • The edited version is displayed on the right. • To exit without saving the copy, press J.
Red-eye Correction: Correcting Red-eye When Shooting with the Flash Press the c button (playback mode) M select an image M d button M Red-eye correction M k button Preview the result and press the k button. Red-eye correction • To exit without saving the copy, press the multi selector J. Back B Save Notes About Red-eye Correction • Red-eye correction can only be applied to images when red-eye is detected. • Red-eye correction can be applied to pets (dogs or cats) even if their eyes are not red.
2 Use JK to select the effect, use HI to select the effect level, and press the k button. Small face 3 2 1 • You can simultaneously apply multiple effects. Adjust or check the settings for all effects Back before pressing the k button.
Small Picture: Reducing the Size of an Image Press the c button (playback mode) M select an image M d button M Small picture M k button 1 Use the multi selector HI to select the desired copy size and press the k button. • Images captured at an image mode setting of j 4608×2592 are saved at a size of 640 × 360, and images captured at an image mode setting of H 3456×3456 are saved at 480 × 480. Press the k button to proceed to step 2.
Crop: Creating a Cropped Copy 1 2 Move the zoom control to enlarge the image (E21). Adjust the image so that only the portion that you want to keep is displayed, and then press the d (menu) button. • Move the zoom control toward g (i) or f (h) to adjust the magnification rate. 3.0 Set a magnification rate at which u is displayed. • Use the multi selector HIJK to scroll to the portion of the image that you want to display. 3 Preview the image and press the k button.
Recording the Location Data on the Image Press the d button M z menu icon M Location data options M k button Set Time zone and date (E95) correctly before using the location data functions. 1 Set Record location data to On. Record location data • After the settings are complete, press the d button or shutter-release button to exit the menu. • To receive signals easily, operate in an open-air area. 2 On Off Check the location data reception on the shooting screen.
B Notes About Location Data Functions B Reference Section • Before using the location data functions, read “ Notes About Location Data Functions (GPS/GLONASS, Electronic Compass)” (Axii). • It takes a few minutes to perform positioning for the location data when positioning is performed for the first time or in a situation where positioning cannot be performed for a long period of time, or just after the battery is replaced.
C Points of Interest (POI) Information POI information is location name information for landmarks (facilities) and other details. • When Display POI in Points of interest Location name information (POI information) (POI) (E90) of the Location data options menu is set to On, the nearest location name information for the current position is displayed during shooting (only when positioning is performed).
Displaying the Shooting Location on the Map (While in Playback Mode) Press the c button (playback mode) M Select images with the recorded location data* M U button * The z icon is displayed during playback for images which have the location data recorded (A5). • Shooting location: Display the shooting Shooting location location of images that have the location data recorded on the map. The shooting location of the image selected before pressing the U button is highlighted in yellow.
Operations When Selecting a Thumbnail Image Operation Description Multi selector Use J K to move the thumbnail image selection. • The shooting location of the selected image is displayed in yellow on the map. Zoom control • g (i): Display the selected image in full-frame playback mode. To display the previous or next image, press J K. • f (h): Return to the map display. U button Return to the playback screen. Display the menu to select the following functions.
C Operations of the Map with Saved Locations When you press the k button and select Center on saved location while the map is displayed (E35, E38) or thumbnails are selected (E36), the map scrolls to the closest saved location from the center of the screen. • Use the multi selector HIJK to move to other MAP saved locations. • Press the l button to cancel a location. - Current location: Cancel the selected saving location. - Selected locations: Cancel multiple saving locations at a time.
Displaying the Current Position on the Map (While in Shooting Mode) Display the shooting screen while positioning is being performed1 M U button2 1 2 See “Recording the Location Data on the Image” (E32). If you press the U button when positioning is not being performed, a world map is displayed. • The current position is displayed at the center of the map. You can save the location and display it on the map. • When the camera lens faces downward, a compass is displayed.
Recording the Log of Movement Information Press the d button M z menu icon M Create log M k button 1 Use the multi selector HI to select Log interval, and press the k button. Create log Start log 24h Log interval 15s End log 2 Select the intervals of log recording and press the k button. • The default setting is 15 s. Log interval 5s 10 s 15 s 30 s 1 min 3 Select Start log, and press the k button.
B Notes About Log Recording • If the date and time are not set, the log cannot be recorded. • Use a fully charged battery to prevent the camera from turning off during log recording. When the battery power becomes exhausted, log recording ends. • Even when the camera is turned off, log recording is continuously performed until the preset time has elapsed if there is still time remaining for log recording. • Log recording ends due to the operations below even when there is time remaining for log recording.
Ending Log Recording to Save it on Memory Cards To display the obtained log data on the map, you need to save it to a memory card. Press the d button M z menu icon M Create log M k button 1 When log recording is completed, select End log on the screen, and press the k button. • Ending log can also be performed before the preset time elapses. 2 Select Save log, and press the k button. • The log data is saved to a memory card.
Viewing the Log of Location Data on the Map Press the d button M z menu icon M View log M k button • Select the log data (date) to be displayed, and press the k button. Your movement route based on the recorded log is displayed on the map. • To erase the selected log or all saved logs, press the l button on the log list screen. 500m • The operations listed below can be performed during the map display. Operation Location log Description Multi selector Move the map display (in four directions).
Recording and Playing Back Movies 1 Display the shooting screen. • Check the remaining amount of movie recording time. 1/250 F3.7 25m 0s 880 Remaining movie recording time 2 Press the b (e movie-record) button to start movie recording. • The focus area for autofocus differs depending on the setting of AF area mode (E79). The default setting is Face priority.
Area Captured in Movies • The area that is captured in a movie varies depending on the Movie options or Movie VR settings in the movie menu. • If Photo info in Monitor settings (E97) in the setup menu is set to Movie frame+auto info, you can confirm the area that will be captured in a movie before you start recording. Maximum Movie Recording Time Individual movie files cannot exceed 4 GB in size or 29 minutes in length, even when there is sufficient free space on the memory card for longer recording.
Notes About Movie Recording B Notes About Saving Images or Movies The indicator showing the number of exposures remaining or the indicator showing the remaining recording time flashes while images or movies are being saved. Do not open the battery-chamber/memory card slot cover or remove the battery or memory card while an indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the memory card.
Capturing Still Images While Recording Movies If the shutter-release button is pressed all the way while recording a movie, one frame is saved as a still image. Movie recording continues while the still image is being saved. • While Q is displayed in the monitor, still images can be captured. While z is displayed, still images cannot be captured. • The size of the captured image varies depending on the Movie options setting (E75).
Operations During Movie Playback To adjust the volume, move the zoom control while a movie is playing (A1). Rotate the multi selector or the command dial to fast forward or rewind. Volume indicator Playback controls are displayed in the monitor. The operations described below can be performed by using the multi selector JK to select a control and then pressing the k button. Function Icon Rewind A Hold down the k button to rewind the movie. Advance B Hold down the k button to advance the movie.
Editing Movies When editing movies, use a sufficiently charged battery to prevent the camera from turning off during editing. When the battery level indicator is B, movie editing is not possible. Extracting Only the Desired Portion of a Movie The desired portion of a recorded movie can be saved as a separate file. 1 Play back a desired movie and pause at the start point of the portion that you want to extract (E47).
5 Use HI to select m (save) and press the k button. Save • Follow the instructions on the screen to save the movie. B Notes About Movie Editing • A movie that was created by editing cannot be trimmed again. • The actual trimmed portion of a movie may differ slightly from the portion selected using the start and end points. • Movies cannot be trimmed so that they are less than two seconds long.
Connecting to a Smart Device (Wi-Fi) 1 Press the Z (Wi-Fi) button on the camera. • The screen shown on the right is displayed. • If no connection confirmation is received from the smart device within 3 minutes, the message No access. is displayed and the camera returns to the Wi-Fi options screen. • You can also select Connect to smart device in the Wi-Fi options menu to display the screen shown on the right.
C Touching an NFC-compatible Smart Device to the Camera for a Wi-Fi Connection When you use a smart device that is compatible with near field communication (NFC) functions and runs on Android OS, you can establish a Wi-Fi connection and start the “Wireless Mobile Utility” by touching the NFC antenna on the smart device to the Y (NMark) on the camera. To Terminate the Wi-Fi Connection Perform one of the operations described below. • Turn off the camera.
Preselecting Images in the Camera That You Want to Transfer to a Smart Device You can preselect images in the camera that you want to transfer to a smart device. Movies cannot be preselected for transfer. 1 Select images to transfer.
Connecting the Camera to a TV (Playback on a TV) 1 Turn off the camera and connect it to the TV. • Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an angle when connecting or disconnecting them. to HDMI jack HDMI micro connector (Type D) 2 Set the TV’s input to external input. • See the documentation provided with your TV for details. 3 Hold down the c (playback) button to turn on the camera. • Images are displayed on the TV.
Connecting the Camera to a Printer (Direct Print) Users of PictBridge-compatible printers can connect the camera directly to the printer and print images without using a computer. Connecting the Camera to a Printer 1 2 Turn on the printer. Turn off the camera and connect it to the printer using the USB cable. • Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an angle when connecting or disconnecting them. 3 The camera is automatically turned on.
Printing Images One at a Time 1 Use the multi selector JK to select the desired image and press the k button. Print selection 15/11/2015 32 • Move the zoom control toward f (h) to switch to thumbnail playback or g (i) to switch to full-frame playback. 2 Use HI to select Copies and press the k button. PictBridge • Use HI to set the desired number of copies (up to 9) and press the k button. 1 prints Start print Copies Paper size 3 Select Paper size and press the k button.
Printing Multiple Images 1 2 When the Print selection screen is displayed, press the d (menu) button. Use the multi selector HI to select Paper size and press the k button. • Select the desired paper size and press the k button. • To print with the paper size setting configured on the printer, select Default. • The paper size options available on the camera vary depending on the printer that you use. • To exit the print menu, press the d button.
Print selection Select images (up to 99) and the number of Print selection copies (up to 9) of each. • Use the multi selector JK to select images, and use HI to specify the number of copies to be printed. • Images selected for printing are indicated by M and the number of Back copies to be printed. To cancel the print selection, set the number of copies to 0. • Move the zoom control toward g (i) to switch to full-frame playback or f (h) to switch to thumbnail playback.
Using ViewNX 2 (Transferring Images to a Computer) Installing ViewNX 2 ViewNX 2 is free software that enables you to transfer images and movies to your computer so that you can view, edit, or share them. To install ViewNX 2, download the ViewNX 2 installer from the website below and follow the onscreen installation instructions. http://nikonimglib.com/nvnx/ For system requirements and other information, see the Nikon website for your region.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2. • When using Windows 7 If the dialog shown at right is displayed, follow the steps below to select Nikon Transfer 2. 1 Under Import pictures and videos, click Change program. A program selection dialog will be displayed; select Import File using Nikon Transfer 2 and click OK. 2 Double-click Import File. If the memory card contains a large number of images, it may take a while for Nikon Transfer 2 to start.
The Shooting Menu (The Common Shooting Options) Image Quality Enter shooting mode* M d button M Image quality M k button * The image quality can be set in shooting modes other than the short movie show mode. The setting is also applied to other shooting modes (except Time-lapse movie and Easy panorama scene modes). Set the image quality (compression ratio) used when saving images. Lower compression ratios result in higher quality images, but the number of images that can be saved is reduced.
Image Size Enter shooting mode* M d button M Image size M k button * The image size can be set in shooting modes other than the short movie show mode. The setting is also applied to other shooting modes (except Time-lapse movie and Easy panorama scene modes). Set the image size (number of pixels) used when saving images. The larger the image size, the larger the size at which it can be printed, but the number of images that can be saved is reduced.
The Shooting Menu (A, B, C, or D Mode) • See “Image Quality” (E60) and “Image Size” (E61) for information about Image quality and Image size. White Balance (Adjusting Hue) Rotate the mode dial to A, B, C or D M d button M A, B, C, or D menu icon M White balance M k button Adjust white balance to suit the light source or weather conditions in order to make the colors in images match what you see with your eyes. Option Description a Auto (default setting) White balance is automatically adjusted.
Using Preset Manual Use the procedure below to measure the white balance value under the lighting used during shooting. 1 Place a white or gray reference object under the lighting that will be used during shooting. 2 Use the multi selector HI to select Preset manual in the White balance menu, and press the k button. • The camera zooms in to the position for measuring white balance. 3 Select Measure.
Metering Rotate the mode dial to A, B, C or D M d button M A, B, C, or D menu icon M Metering M k button The process of measuring the brightness of the subject to determine the exposure is known as “metering.” Use this option to set the method of how the camera meters exposure. Option Description Matrix G (default setting) The camera uses a wide area of the screen for metering. Recommended for typical shooting.
Continuous Shooting Rotate the mode dial to A, B, C or D M d button M A, B, C, or D menu icon M Continuous M k button Option Description One image is captured each time the shutter-release button is pressed. k Continuous H While the shutter-release button is held all the way down, images are captured continuously. • The frame rate for continuous shooting is about 7 fps and the maximum number of continuous shots is about 5 (when image quality is set to Normal and when image size is set to i 4608×3456).
Option Description j Continuous H: 60 fps Each time the shutter-release button is pressed all the way, images are captured at a high speed rate. • The frame rate for continuous shooting is about 60 fps and the maximum number of continuous shots is 25. • The image quality is fixed at Normal and the image size is fixed at A (1280 × 960 pixels). B Notes About Continuous Shooting • Focus, exposure, and white balance are fixed at the values determined with the first image in each series.
C Pre-shooting Cache When the shutter-release button is pressed halfway or all the way down, images are saved as described below. Press down halfway Press down all the way Images saved by pressing halfway Images saved by pressing all the way • The pre-shooting cache icon (Q) on the shooting screen changes to green while the shutter-release button is pressed halfway.
ISO Sensitivity Rotate the mode dial to A, B, C or D M d button M A, B, C, or D menu icon M ISO sensitivity M k button A higher ISO sensitivity allows darker subjects to be captured. Additionally, even with subjects of similar brightness, pictures can be taken at faster shutter speeds, and blurring caused by camera shake and subject movement can be reduced. • When a higher ISO sensitivity is set, images may contain noise.
AF Area Mode Rotate the mode dial to A, B, C or D M d button M A, B, C, or D menu icon M AF area mode M k button Set how the camera selects the focus area for autofocus when shooting still images. Option Description When the camera detects a human face, it focuses on that face. See “Using Face Detection” (E16) for more information. 1/250 F3.7 25m 0s 880 Focus area a Face priority Use the multi selector HIJK to move the focus area to where you want to focus.
Option Description The camera focuses on the subject in the center of the frame. y Center 1/250 F3.7 25m 0s 880 Focus area s Subject tracking M Target finding AF (default setting) Use this function to take pictures of moving subjects. Register the subject on which the camera focuses. The focus area automatically moves to track the subject. See “Using Subject Tracking” (E71) for more information. Start 1/250 F3.7 25m 0s 880 1/250 F3.
Using Subject Tracking Rotate the mode dial to A, B, C or D M d button M A, B, C, or D menu icon M AF area mode M k button M s Subject tracking M k button M d button 1 Register a subject. • Align the subject that you want to track with the border in the center of the monitor and press the k button. • When the subject is registered, a yellow border (focus area) is displayed around it and the camera begins tracking the subject. Start • If the subject cannot be registered, the 25m 0s 1/250 F3.
Autofocus Mode Rotate the mode dial to A, B, C or D M d button M A, B, C, or D menu icon M Autofocus mode M k button Set how the camera focuses when shooting still images. Option Description A Single AF The camera focuses only when the shutter-release button is pressed halfway. B Full-time AF The camera continues focusing even when the shutterrelease button is not pressed halfway. The sound of lens drive movement is heard while the camera focuses.
The Smart Portrait Menu • See “Image Quality” (E60) and “Image Size” (E61) for information about Image quality and Image size. Self-Collage Rotate the mode dial to F M d button M F menu icon M SelfCollage M k button Option Description Interval Set the interval time between each shot. • Short, Medium (default setting), or Long can be selected. Shutter sound Set whether to activate the shutter sound when shooting with the self-collage function.
Blink Proof Rotate the mode dial to F M d button M F menu icon M Blink proof M k button Option Description y On The camera automatically releases the shutter twice with every shot and saves A blink was detected in the picture just taken. one image in which the subject’s eyes are open. • If the camera saved an image in which the subject’s eyes may have been closed, the dialog shown on the right is displayed for a few seconds. Off (default setting) Turns the blink proof off.
The Movie Menu Movie Options Enter shooting mode M d button M D menu icon M Movie options M k button Select the desired movie option to record. Select normal speed movie options to record at normal speed, or HS movie options (E76) to record in slow or fast motion. The movie options that can be selected vary depending on the Frame rate setting (E82). • Memory cards with an SD Speed Class rating of 6 or faster are recommended for recording movies (F19).
HS Movie Options Recorded movies are played back in fast or slow motion. See “Recording Movies in Slow Motion and Fast Motion (HS Movie)” (E78). Option h HS 480/4× a j HS 1080/0.5× Y Image size Aspect ratio (horizontal to vertical) 640 × 480 4:3 1920 × 1080 16:9 Description 1/4-speed slow motion movies • Max. recording time*: 15 seconds (playback time: 1 minute) 2× speed fast motion movies • Max.
C Playing Back in Slow Motion and Fast Motion When recording at normal speed: Recording time 10 s Playback time 10 s When recording at h HS 480/4×, or a HS 480/4×: Movies are recorded at 4× normal speed. They are played back in slow motion at 4× slower speed. Recording time 10 s Playback time 40 s Slow motion playback When recording at j HS 1080/0.5×, or Y HS 1080/0.5×: Movies are recorded at 1/2 normal speed. They are played back in fast motion at 2× faster speed.
Recording Movies in Slow Motion and Fast Motion (HS Movie) Enter shooting mode M d button M D menu icon M Movie options M k button Movies recorded using HS movie can be played back in slow motion at 1/4 of the normal playback speed, or in fast motion at twice the normal playback speed. 1 Use the multi selector HI to select an HS movie option (E76) and press the k button. • After applying the option, press the d button to return to the shooting screen.
AF Area Mode Enter shooting mode M d button M D menu icon M AF area mode M k button Set how the camera selects the focus area for autofocus in short movie show mode or when recording movies. Option Description a Face priority (default setting) When the camera detects a human face, it focuses on that face. See “Using Face Detection” (E16) for more information. y Center The camera focuses on the subject in the center of the frame.
Autofocus Mode Enter shooting mode M d button M D menu icon M Autofocus mode M k button Set how the camera focuses in short movie show mode or when recording movies. Option Description A Single AF (default setting) Focus is locked when movie recording starts. Select this option when the distance between the camera and the subject will remain fairly consistent. B Full-time AF Camera focuses continuously.
Movie VR Enter shooting mode M d button M D menu icon M Movie VR M k button Set to reduce the effects of camera shake in short movie show mode or when recording movies. Set this option to Off when using a tripod to stabilize the camera during recording. Option Description V On (hybrid) (default setting) Performs optical compensation for camera shake using the lens shift method. Also performs electronic VR using image processing. The angle of view (i.e., the area visible in the frame) becomes narrower.
Frame Rate Enter shooting mode M d button M D menu icon M Frame rate M k button Select the frame rate (fields per second for the interlaced format) used in short movie show mode or when recording movies. When the frame rate setting is switched, options that can be set in Movie options (E75) change. Option Description 30 fps (30p/60i) Suited for playback on a TV using the NTSC standard. 25 fps (25p/50i) Suited for playback on a TV using the PAL standard.
Slide Show Press the c button (playback mode) M d button M Slide show M k button Play back images one by one in an automated “slide show.” When movie files are played back in the slide show, only the first frame of each movie is displayed. 1 Use the multi selector HI to select Start and press the k button. Slide show Start Frame intvl • The slide show begins.
Protect Press the c button (playback mode) M d button M Protect M k button The camera protects selected images from accidental deletion. Select images to protect or cancel protection from the image selection screen (A53). Note that formatting the memory card or the camera’s internal memory permanently deletes all data including protected files (E103).
Copy (Copy Between the Memory Card and Internal Memory) Press the c button (playback mode) M d button M Copy M k button Images can be copied between a memory card and the internal memory. • When a memory card that contains no images is inserted and the camera is switched to playback mode, Memory contains no images. is displayed. In that case, press the d button to select Copy. 1 2 Use the multi selector HI to select a destination option to which images are copied and press the k button.
Sequence Display Options Press the c button (playback mode) M d button M Sequence display options M k button Select the method used to display images in the sequence (E24). Option Description Q Individual pictures Displays each image in a sequence individually. F is displayed on the playback screen. C Key picture only (default setting) Displays only the key picture for images in a sequence. The setting is applied to all sequences and saved in the camera’s memory even if the camera is turned off.
The Location Data Options Menu During the map display, you cannot select Time zone and date, Format memory/Format card, Language, and Reset all in the setup menu. Location Data Options Press the d button M z menu icon M Location data options M k button Description Record location data When set to On, signals are received from the positioning satellites, and positioning starts (E32). • Default setting: Off Update A-GPS file A memory card is used to update the A-GPS (assist GPS) file.
2 Use a card reader or other device to copy the downloaded file to the “NCFL” folder of the memory card. • The “NCFL” folder is located directly under the memory card root directory. If the memory card does not have “NCFL” folder, create a new folder. 3 Insert the memory card containing the copied file into the camera. 4 5 Turn on the camera. 6 Press the d (menu) button to display the Location data options menu, and use the multi selector to select Location data options.
Calculate Distance Press the c button (playback mode) M Display a map (E35) M d button M z menu icon M Calculate distance M k button Calculate the linear distance from the current position to the shooting location of the image or between the shooting locations of two images. 1 Use the multi selector HI to select the desired option for calculating the distance, and press the k button.
Points of Interest (POI) (Recording and Displaying Location Name Information) Press the d button M z menu icon M Points of interest (POI) M k button Configure the POI (points of interest, location name information) settings. Option Description Reference Section Embed POI Set whether or not to record the location name information on the images to be shot. • Default setting: Off • The location name information can be recorded on both still images and movies.
Set Clock from Satellite Press the d button M z menu icon M Set clock from satellite M k button Signals from the positioning satellites are used to set the date and time of the camera’s internal clock. Check the positioning status before setting the clock using this option. B Notes About Set Clock from Satellite • To set the camera’s internal clock, positioning must have been done successfully (E32).
Option Compass correction B Description Correct the compass when the compass direction is not displayed correctly. When the screen shown Compass correction on the right is displayed, Move camera in a figure eight. swing the camera to draw a figure eight in the air while turning your wrist to face the camera forward and backward, side to side, or up and down. Notes About Using the Electronic Compass Reference Section • The electronic compass is not displayed when the camera lens is facing upwards.
The Wi-Fi Options Menu Press the d button M q menu icon M k button Configure the Wi-Fi (wireless LAN) settings to connect the camera and a smart device. Option Description Connect to smart device Select when wirelessly connecting the camera and a smart device. See “Connecting to a Smart Device (Wi-Fi)” (E50) for more information. Upload from camera Select when wirelessly connecting the camera and a smart device.
Option Description Current settings Display the current settings. Restore default settings Restore the Wi-Fi settings to their default values. Operating the Text Input Keyboard Character Input for SSID and Password • Use the multi selector HIJK to select alphanumeric characters. Press the k button to enter the selected character in the text field and move the cursor to the next space. • To move the cursor in the text field, select N or O on the keyboard, and press the k button.
The Setup Menu Time Zone and Date Press the d button M z menu icon M Time zone and date M k button Set the camera clock. Option Description • Select a field: Press the multi selector JK. • Edit the date and time: Press HI. Date and time can also be changed by rotating the Date and time multi selector or command dial. • Apply the setting: Select the minute field setting and press the k button. Date and time D M Y 15 11 2015 h m 15 30 Edit Select Year/Month/Day, Month/Day/Year, or Day/Month/ Year.
2 Select w Home time zone or x Travel destination and press the k button. • The date and time displayed in the monitor changes depending on whether the home time zone or travel destination is selected. 3 Press K. Time zone Home time zone Travel destination London, Casablanca 15/11/2015 15:30 Time zone Home time zone Travel destination London, Casablanca 15/11/2015 15:30 4 Use JK to select the time zone. • Press H to enable daylight saving time function, and W is displayed.
Monitor Settings Press the d button M z menu icon M Monitor settings M k button Option Description Photo info Set whether or not to display information in the monitor. Image review Set whether or not to display the captured image is displayed immediately after shooting. • Default setting: On Brightness Adjust the brightness. • Default setting: 3 Photo info Shooting mode Playback mode 4/4 Show info 1/250 Auto info (default setting) 25m 0s 880 0004.
Shooting mode Playback mode 4/4 25m 0s 1/250 F3.7 880 Framing grid+auto info In addition to the information shown in Auto info, a framing grid is displayed to help frame pictures. The framing grid is not displayed while recording movies. 0004. JPG 15/11/2015 15:30 Same as Auto info. 4/4 1/250 Movie frame+auto info Reference Section E98 F3.
Date Stamp Press the d button M z menu icon M Date stamp M k button The shooting date and time can be stamped on images when shooting. 15.11.2015 Option Description f Date Date is stamped on images. S Date and time Date and time are stamped on images. Off (default setting) Date and time are not stamped on images.
Photo VR Press the d button M z menu icon M Photo VR M k button Select the vibration reduction setting used when shooting still images. Select Off when using a tripod to stabilize the camera during shooting. Option Description V On (hybrid) Performs optical compensation for camera shake using the lens shift method. Under the following conditions, also performs electronic VR using image processing.
AF Assist Press the d button M z menu icon M AF assist M k button Option Description a Auto (default setting) The AF-assist illuminator automatically lights up when you press the shutter-release button under dim lighting. The illuminator has a range of about 5.0 m (16 ft) at the maximum wide-angle position and about 4.5 m (14 ft) at the maximum telephoto position. • Note that for some shooting modes or focus areas, the AF-assist illuminator may not light. Off The AF-assist illuminator does not light.
Sound Settings Press the d button M z menu icon M Sound settings M k button Option Description Button sound When On (default setting) is selected, the camera produces one beep when operations are performed, two beeps when focus is acquired on the subject, and three beeps when an error occurs. The welcome screen sound is also produced. • Sounds are disabled when using Pet portrait scene mode.
Format Card/Format Memory Press the d button M z menu icon M Format card/Format memory M k button Use this option to format a memory card or the internal memory. Formatting the memory cards or internal memory permanently deletes all data. Data that has been deleted cannot be recovered. Make sure to save important images to a computer before formatting. Formatting a Memory Card • Insert a memory card into the camera. • Select Format card in the setup menu and then press the k button.
Charge by Computer Press the d button M z menu icon M Charge by computer M k button Option Description a Auto (default setting) When the camera is connected to a computer that is running (A58), the battery inserted into the camera is automatically charged using power supplied by the computer. Off The battery inserted into the camera is not charged when the camera is connected to a computer.
Reset All Press the d button M z menu icon M Reset all M k button When Reset all is selected, the camera’s settings are restored to their default values. • Some settings, such as Time zone and date or Language, are not reset. C Resetting File Numbering To reset file numbering to “0001”, delete all images saved on the memory card or in the internal memory (A19) before selecting Reset all.
Error Messages Refer to the table below if an error message is displayed. Display Battery temperature is elevated. The camera will turn off. The camera will turn off to prevent overheating. Memory card is write protected. This card cannot be used. This card cannot be read. A Cause/Solution The camera turns off automatically. Wait until the camera or battery temperature has cooled before resuming use. – The write-protect switch is in the “lock” position.
Display Cannot record movie. Save previously recorded data as a time-lapse movie? The camera turned off while recording timelapse movie. • Select Yes to create a time-lapse movie with the previously captured images. • Select No to delete the incomplete data. Memory contains no images. There are no images in the internal memory or on the memory card. • Remove the memory card to play back images in the internal memory.
Display Cause/Solution A No A-GPS file found on card. An A-GPS file that can be updated is not found on the memory card. Check the following items: • Whether the memory card is inserted • Whether the A-GPS file is stored on the memory card • Whether the A-GPS file saved on the memory card is more recent than the A-GPS file saved in the camera • Whether the A-GPS file is still valid – Update failed. Unable to update A-GPS file. The A-GPS file may be corrupted.
Display Cause/Solution A Could not connect. The camera failed to establish the connection while receiving the communication signals from the smart device. Select a different channel in Channel in Options in the Wi-Fi options menu and establish the wireless connection again. E50, E93 Wi-Fi connection terminated.
Display Cause/Solution A Printer error: check printer status. After solving the problem, select Resume and press the k button to resume printing.* – Printer error: check paper. Load the specified size of paper, select Resume, and press the k button to resume printing.* – Printer error: paper jam. Remove the jammed paper, select Resume, and press the k button to resume printing.* – Printer error: out of paper.
File Names Images, or movies are assigned file names as follows. File name: DSCN0001.JPG (1) (2) (3) (1) Identifier Not shown on the screen of the camera.
Optional Accessories Battery Charger Battery Charger MH-65 It takes about 2 hour and 30 minutes to charge a fully exhausted battery. AC Adapter EH-62F (connect as shown) AC Adapter Make sure that the power connector cable is fully inserted in the power connector slot before inserting the AC adapter into the battery chamber. In addition, make sure that the power connector cable is fully inserted in the battery chamber slot before closing the battery-chamber/memory card slot cover.
Technical Notes and Index Caring for the Product..................................... F2 The Camera.............................................................................................F2 The Battery..............................................................................................F3 The Charging AC Adapter .................................................................F4 Memory Cards........................................................................................
Caring for the Product Observe the precautions described below in addition to the warnings in “For Your Safety” (Avii-ix) when using or storing the device. The Camera Do Not Apply Strong Impact to the Camera The product may malfunction if subjected to strong shock or vibration. In addition, do not touch or apply force to the lens or lens cover. Keep Dry The device will be damaged if immersed in water or subjected to high humidity.
Notes About the Monitor • Monitors and electronic viewfinders are constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective. Hence while these displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is not a malfunction and has no effect on images recorded with the device. • Images in the monitor may be difficult to see under bright lighting.
Using the Battery When Cold On cold days, the capacity of batteries tends to decrease. If an exhausted battery is used at a low temperature, the camera may not turn on. Keep spare batteries in a warm place and exchange as necessary. Once warmed, a cold battery may recover some of its charge. Battery Terminals Dirt on the battery terminals may prevent the camera from functioning. Should the battery terminals become dirty, wipe them off with a clean, dry cloth before use.
Memory Cards Precautions for Use • Use only Secure Digital memory cards. See “Approved Memory Cards” (F19) for recommended memory cards. • Be sure to follow the precautions described in the documentation included with the memory card. • Do not put labels or stickers on memory cards. Formatting Technical Notes and Index • Do not format the memory card using a computer. • The first time you insert a memory card that has been used in another device into this camera, be sure to format it with this camera.
Cleaning and Storage Cleaning Do not use alcohol, thinner, or other volatile chemicals. Lens Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end). To remove fingerprints or other stains that cannot be removed with a blower, wipe the lens with a soft cloth, using a spiral motion that starts at the center of the lens and working toward the edges.
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Power, Display, Settings Issues Problem Cause/Solution A The camera is on but does not respond. • Wait for recording to end. • If the problem persists, turn the camera off. If the camera does not turn off, remove and reinsert the battery or batteries or, if you are using an AC adapter, disconnect and reconnect the AC adapter.
Technical Notes and Index F8 A Problem Cause/Solution 8 The battery inserted in the camera cannot be charged. • Confirm all connections. • When connected to a computer, the camera may not charge for any of the reasons described below. - Off is selected for Charge by computer in the setup menu. - Battery charging stops if the camera is turned off.
Problem Screen for setting time zone and date is displayed when the camera is turned on. A Cause/Solution The clock battery is exhausted; all settings were restored to their default values. 11, 12 The camera makes sound. Depending on the Autofocus mode setting or the shooting mode, the camera may produce an audible focusing sound. 20, 47, 50, 51 Unable to select a menu. • Some functions cannot be used with other menu options. • Some menus are not available when Wi-Fi is connected.
Problem Images are blurred. 16, 35 47, 49 47, 51, 54 37 Bright specks appear in images captured with flash. The flash is reflecting off particles in the air. Lower the flash, and set the flash mode setting to W (off). 35 Flash does not fire. • A shooting mode that restricts the flash is selected. • A function that restricts the flash is enabled. • Digital zoom is set to Off or Crop in the setup menu. Digital zoom • Digital zoom cannot be used with certain cannot be used.
Problem • • Images are too • dark • (underexposed). • Cause/Solution A The flash window is blocked. The subject is beyond the range of the flash. Adjust exposure compensation. Increase ISO sensitivity. The subject is backlit. Raise the flash, or set the scene mode to Backlighting with HDR set to Off. 13 F16 40, 43 47, 49 35, E6 Images are too bright (overexposed). Adjust exposure compensation. 40, 43 Unexpected results when flash set to V (auto with redeye reduction/ red-eye reduction).
Playback Issues Cause/Solution A File cannot be played back. • This camera may not be able to play back images saved with another make or model of digital camera. • This camera cannot play back movies recorded with another make or model of digital camera. • This camera may not be able to play back data edited on a computer. – Cannot zoom in on image. • Playback zoom cannot be used with movies. • This camera may not be able to zoom in on images captured with another make or model of digital camera.
A Problem Cause/Solution The PictBridge startup screen is not displayed when the camera is connected to a printer. With some PictBridge-compatible printers, the PictBridge startup screen may not be displayed and it may be impossible to print images when Auto is selected for Charge by computer in the setup menu. Set the Charge by computer to Off and reconnect the camera to the printer. 47, 54 Images to be printed are not displayed. • The memory card contains no images.
Problem A Cause/Solution The recorded location name is different from The desired landmark name may not be registered, or the intended a different landmark name may be registered. one or is not displayed. Unable to update the AGPS file. – • Check the following items.
Specifications Nikon COOLPIX S9900 Digital Camera Type Compact digital camera Number of effective pixels 16.0 million (Image processing may reduce the number of effective pixels.) Image sensor 1/2.3-in. type CMOS; approx. 16.76 million total pixels Lens NIKKOR lens with 30× optical zoom Focal length 4.5–135 mm (angle of view equivalent to that of 25– 750 mm lens in 35mm [135] format) f/-number f/3.7–6.
Image size (pixels) • • • • • • • ISO sensitivity (Standard output sensitivity) • ISO 125–1600 • ISO 3200, 6400 (available when using A, B, C, or D mode) 16M 8M 4M 2M VGA 16:9 12M 1:1 4608×3456 3264×2448 2272×1704 1600×1200 640×480 4608×2592 3456×3456 Exposure Metering mode Matrix, center-weighted, spot (digital zoom 2× or more) Exposure control Programmed auto exposure with flexible program, shutter-priority auto, aperture-priority auto, manual, and exposure compensation (–2.0–+2.
Wi-Fi (Wireless LAN) Standards IEEE 802.11b/g/n (standard wireless LAN protocol) Range (line of sight) Approx. 10 m (10 yd) Operating frequency 2412–2462 MHz (1–11 channels) Data rates (actual measured values) IEEE 802.11b: 5 Mbps IEEE 802.11g: 15 Mbps IEEE 802.11n: 15 Mbps Security OPEN/WPA2 Access protocols Infrastructure Location data • GPS Receiving frequency: 1575.42 MHz Geodetic system: WGS 84 • GLONASS Receiving frequency: 1598.0625–1605.
Operating environment Temperature 0°C–40°C (32°F–104°F) Humidity 85% or less (no condensation) • Unless otherwise stated, all figures assume a fully-charged battery and an ambient temperature of 23 ±3°C (73.4 ±5.4°F) as specified by the Camera and Imaging Products Association (CIPA). 1 2 Battery life may vary depending on conditions of use, such as the interval between shots or the length of time that menus and images are displayed.
Approved Memory Cards The following Secure Digital (SD) memory cards have been tested and approved for use in this camera. • Memory cards with an SD Speed Class rating of 6 or faster are recommended for recording movies. When using a memory card with a lower Speed Class rating, movie recording may stop unexpectedly.
AVC Patent Portfolio License This product is licensed under the AVC Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.
USER LICENSE AGREEMENT FOR MAP DATA AND LOCATION NAME DATA The map data and location name data that are stored in this digital camera (“Data”) is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and Nikon Corporation (“Nikon”) and its licensors (including their licensors and suppliers) on the other hand.
Technical Notes and Index Disclaimer of Liability: NIKON AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMA
Government End Users. If the Data supplied by HERE is being acquired by or on behalf of the United States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government, the Data is a “commercial item” as that term is defined at 48 C.F.R. (“FAR”) 2.
Notices related to licensed software copyright holders. • Map data and location name data for Japan © 2014 ZENRIN CO., LTD. All rights reserved. This service uses map and POI data of ZENRIN CO., LTD. “ZENRIN” is a registered trademark of ZENRIN CO., LTD. • Map data and location name data except for Japan © 1987-2014 HERE All rights reserved.
Technical Notes and Index Includes content of GeoforUs, licensed in accordance with (http://creativecommons.org/licenses/by/ 3.0/legalcode). Includes content of Comune di Milano, licensed under (http://creativecommons.org/licenses/by/2.5/ it/legalcode) and updated by licensee November 1, 2013. Includes content of the “Comunità Montana della Carnia”, licensed under (http://www.dati.gov.it/iodl/ 2.0/) and updated by licensee December 1, 2013.
Sri Lanka: This product incorporates original source digital data obtained from the Survey Department of Sri Lanka 2009 Survey Department of Sri Lanka The data has been used with the permission of the Survey Department of Sri Lanka Israel: Survey of Israel data source Jordan: Royal Jordanian Geographic Centre. Mozambique: Certain Data for Mozambique provided by Cenacarta 2013 by Cenacarta Nicaragua: The Pacific Ocean and Caribbean Sea maritime borders have not been entirely defined.
Index Symbols d Menu button ..................... 2, 47, 49, 51, 52, 54 l Delete button........ 2, 19, E25 Y N-Mark............... 1, E51, E52 A AC adapter.......................... 57, E112 AF area mode ....................... 50, 51, E69, E79 AF assist ............................... 54, E101 AF-assist illuminator............................... 1 A-GPS file .......................................... E87 Aperture value.............................. 17, 31 Aperture-priority auto mode .....................
Brightness ............................. 54, E97 Button sound.............................. E102 C Technical Notes and Index Calculate distance ...................... E89 Calendar display .......................... E22 Capturing still images during recording movies........................ E46 Charge by computer .................................................. 54, E104 Charge lamp....................................... 2, 8 Charger.................................... 9, E112 Charging AC adapter ........
Format internal memory .................................................. 54, E103 Format memory............. 54, E103 Format memory cards ........................................... 7, 54, E103 Formatting ................. 7, 54, E103 Frame rate.............................. 51, E82 Full-frame playback ......... 18, E21 Full-time AF ...... 51, E72, E80 Functions that cannot be used simultaneously...................................... 44 G Glamour retouch.... 25, 52, E28 H HDMI cable .....................
Number of exposures remaining ...................................................... 13, E60 Number of shots.......................... E73 O Optical zoom .......................................... 17 Optional accessories ............... E112 Options.............................................. E93 P Technical Notes and Index Paper size ...................... E55, E56 Party/indoor f.................... 23, E4 Pet portrait auto release ............ E7 Pet portrait O........................
T Target finding AF .................................. 50, E18, E70 Telephoto ................................................. 17 Text input......................................... E94 Thumbnail playback........ 18, E22 Time difference ............................ E95 Time-lapse movies N...... 23, E9 Time zone .............................. 12, E95 Time zone and date ........................................... 11, 54, E95 Toy camera effect 1 m .............. E8 Toy camera effect 2 n..............
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
