Reference Manual
Table Of Contents
- Introduction
- Parts of the Camera
- Preparing for Shooting
- Basic Shooting and Playback Operations
- Shooting Features
- Auto Mode
- Scene Mode (Shooting Suited to Scenes)
- Special Effects Mode (Applying Effects When Shooting)
- P, S, A, M Modes (Setting the Exposure for Shooting)
- U (User Settings) Mode
- Flash Mode
- Self-timer
- Smile Timer (Shooting Smiling Faces Automatically)
- Focus Mode
- Exposure Compensation (Adjusting Brightness)
- Functions That Can Be Set with the Fn (Function) Button
- Functions That Cannot Be Used Simultaneously When Shooting
- Functions That Can Be Set with the MENU (Menu) Button
- Using Location Data Functions
- Using the Wi-Fi (Wireless LAN) Function
- Connecting the Camera to a TV, Printer, or Computer
- Reference Section
- Hints and Notes About the Scene Mode
- Default Settings (Flash, Focus mode, Etc.)
- Focusing
- The Control Range of the Shutter Speed (P, S, A, M Modes)
- Playback Zoom
- Thumbnail Playback/Calendar Display
- Viewing and Deleting Images Captured Continuously (Sequence)
- Editing Images (Still Images)
- Recording and Playing Back Movies
- Capturing Still Images While Recording Movies
- Operations During Movie Playback
- Editing Movies
- Recording the Location Data on the Image
- Recording the Log of Movement Information
- Connecting to a Smart Device (Wi-Fi)
- Preselecting Images in the Camera That You Want to Transfer to a Smart Device
- Connecting the Camera to a TV (Playback on a TV)
- Connecting the Camera to a Printer (Direct Print)
- Using ViewNX-i (Transferring Images to a Computer)
- The Shooting Menu (The Common Shooting Options)
- The Shooting Menu (P, S, A or M Mode)
- Picture Control (COOLPIX Picture Control)
- Custom Picture Control (COOLPIX Custom Picture Control)
- White Balance (Adjusting Hue)
- Metering
- Continuous Shooting
- ISO Sensitivity
- Exposure Bracketing
- AF Area Mode
- Autofocus Mode
- Flash Exp. Comp.
- Noise Reduction Filter
- Active D-Lighting
- Multiple Exposure
- Zoom Memory
- Startup Zoom Position
- M Exposure Preview
- The Movie Menu
- The Playback Menu
- The Wi-Fi Options Menu
- The Location Data Options Menu
- The Setup Menu
- Time Zone and Date
- Slot Empty Release Lock
- Monitor Settings
- EVF Auto Toggle (Automatically Switching the Display to the Viewfinder)
- Date Stamp
- Vibration Reduction
- AF Assist
- Digital Zoom
- Assign Side Zoom Control
- Sound Settings
- Auto Off
- Format Card
- Language
- Charge by Computer
- Toggle Av/Tv Selection
- Reset File Numbering
- Peaking
- Reset All
- Firmware Version
- Error Messages
- File Names
- Optional Accessories
- Shooting with Remote Control ML-L3
- Principle Functions of the Controls
- Technical Notes and Index
E118
Reference Section
4 Aim the transmitter
at the infrared
receiver on the front
of the camera (A1)
and press the
transmission button.
• Press the transmission
button from a distance of
5 m (16 ft) or less.
• In the remote instant shooting mode, once the subject is in focus, the
shutter is released.
• When the time for self-timer is set to Z 10s (10 seconds) or Z 2s (2 seconds),
the self-timer lamp flashes when the subject is in focus, and then about 1
second before the shutter is released, the lamp stops flashing and remains lit.
To stop the self-timer before an image is captured, press the transmission
button again.
• In the self-timer remote control mode, the remote control mode is set to Z
(remote instant shooting) when the shutter is released.
Replacing the Battery for Remote Control ML-L3 (3V
CR2025 Lithium Battery)
• When changing the remote control battery, make sure that the battery’s
positive (+) and negative (–) terminals are oriented correctly.
• Make sure to read and follow the warnings of “For Your Safety” (Avi).
B Notes About the Remote Control
• The remote control may not function even from a distance of 5 m (16 ft) or less
when shooting in backlit conditions.
• The setting may not be changed when using certain settings of other functions.